Zero print time???

[DrBwts 1]

So I sliced my STL in Cura & its telling me that it will take 0 minutes to print!

Wall thickness of 0.2mm, is this just too thin?

 

 

EDIT: Yes my walls were too thin

Edited March 29, 2022 by DrBwts
solved

[Smithy 1,145]

You already found it, but yes 0.2 is too thin for a 0.4 nozzle. You can try to enable "print thin walls" in Cura, but the result will not be the best.