UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Could you show a photo please of the problem and also a screenshot of the model in cura after sliced?
In my experience PLA doesn't stick super well to PVA but it's usually fine. The other way around is usually the problem (pva not sticking on top of PLA and there are settings to deal with this second issue but none to deal with the first). Nylon and pva stick together much better.
Usually PVA issues involve humidity getting into the filament. I find even just 1 day sitting on the back of the printer is sometiems enough to "ruin" the PVA. You can dry the PVA by unspooling enough meters for your print (don't cut the filament) and putting that on the heated bed with the spool on top. Then set the bed temp to 70C (no hotter) and cover with a few towels or blankets and then let it sit like that for 3 to 4 hours.
One way to tell if your PVA or Nylon is too wet is that you will see steam coming out of the nozzle while it prints and maybe hear it crackling and sputtering. Also printed PVA should be transparent if dry - at least on the bottom layer. If it is very snowy that is tiny amounts of water making tiny steam bubbles.
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
gr5 2,224
Could you show a photo please of the problem and also a screenshot of the model in cura after sliced?
In my experience PLA doesn't stick super well to PVA but it's usually fine. The other way around is usually the problem (pva not sticking on top of PLA and there are settings to deal with this second issue but none to deal with the first). Nylon and pva stick together much better.
Usually PVA issues involve humidity getting into the filament. I find even just 1 day sitting on the back of the printer is sometiems enough to "ruin" the PVA. You can dry the PVA by unspooling enough meters for your print (don't cut the filament) and putting that on the heated bed with the spool on top. Then set the bed temp to 70C (no hotter) and cover with a few towels or blankets and then let it sit like that for 3 to 4 hours.
One way to tell if your PVA or Nylon is too wet is that you will see steam coming out of the nozzle while it prints and maybe hear it crackling and sputtering. Also printed PVA should be transparent if dry - at least on the bottom layer. If it is very snowy that is tiny amounts of water making tiny steam bubbles.
Link to post
Share on other sites