UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
We just went through this with an Ender 3 Pro that had the problem. A workaround seems to have gotten the job done. It is described in THIS THREAD .
NOTE: When using the M25 command it's possible that you might have to "Pause" the print on the LCD (even though the printer is in pause mode) in order to bring up the "Resume" command.
So that sequence would be...
The file is printing and comes to the pause section. It parks the head and the M25 causes the printer to pause.
You put the magnet in.
On the LCD find the menu with the "pause" command and click on "Pause" and then move to the Resume command and click on it.
The G4 method always works but you lose control of the printer because G4 is a timed event. You don't get to choose when the printer restarts.
Edited by GregValiant
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
GregValiant 1,351
We just went through this with an Ender 3 Pro that had the problem. A workaround seems to have gotten the job done. It is described in THIS THREAD .
NOTE: When using the M25 command it's possible that you might have to "Pause" the print on the LCD (even though the printer is in pause mode) in order to bring up the "Resume" command.
So that sequence would be...
The file is printing and comes to the pause section. It parks the head and the M25 causes the printer to pause.
You put the magnet in.
On the LCD find the menu with the "pause" command and click on "Pause" and then move to the Resume command and click on it.
The G4 method always works but you lose control of the printer because G4 is a timed event. You don't get to choose when the printer restarts.
Link to post
Share on other sites