Jump to content

Custom Filament doesn't use temperature


Recommended Posts

Posted · Custom Filament doesn't use temperature

I've tried to copy PLA default material and change the temperature to 190, but no matter what I do, I can't get it to actually use that temperature.

It says at the top that it's using my 'Custom PLA 190' as the material, and I re-check the configuration for it and it still says 190...


Also, real quick, is there some technical reason that the bed and extruder can't both heat at the same time?

  • Link to post
    Share on other sites

    Posted · Custom Filament doesn't use temperature

    in your custom profile, make sure the material/temperature settings have no fx on the left of the temp.


    And there is no reason you cannot heat bed and extruder at the same time, depends on what you have in the machine/start code



  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.4 stable released
        The full stable release of UltiMaker Cura 5.4 is here and it makes it easier than ever to remove brims and supports from your finished prints. UltiMaker S series users can also look forward to print profiles for our newest UltiMaker PET CF composite material!
          • Like
        • 58 replies
    • Create New...