How to make my home position at back of bed plate?

[Dantech 0]

Currently, my printer stops at the left front corner after a print which makes it difficult to remove the magnetic bed plate to remove the parts. It also causes difficulty putting the bed plate back on.

How do I make my machine stop at the left rear corner?

I checked my settings in CURA, and the " origin at center" box is unchecked.

My printer is an Ender V2 S1.

Thanks.

[GregValiant 1,287]

I found and Ender 3 V2 and an Ender 3 S1.

The basic Ender 3 "Ending Gcode" should do that.  It can be adjusted in Cura.

Click on "Settings / Printers / Manage Printers" and then click on Machine Settings.

On the right side of the dialog is the Ending Gcode and this is from an Ender 3:

 

G91 ;Relative positioning

G1 E-2 F2700 ;Retract a bit

G1 E-2 Z0.2 F2400 ;Retract and raise Z

G1 X5 Y5 F3000 ;Wipe out

G1 Z10 ;Raise Z more

G90 ;Absolute positioning

 

G1 X0 Y{machine_depth} ;Present print

M106 S0 ;Turn-off fan

M104 S0 ;Turn-off hotend

M140 S0 ;Turn-off bed

 

M84 X Y E ;Disable all steppers but Z

 

The bold line is the one you want.  It has to go in after the G90 line.  You could also just copy and paste all of that in.

 

[Dantech 0]

Thank-you!