Hi all,
I only use raft to give a different texture finnish and I am quite happy with the actual raft settings.
The left heart (lid) was made with raft
2) Raft print temperature
3) Separate feed rate for raft
4) Separate print temperature for object first layer.
All this can be made manually on the UM2 and since the changes will be made right after starting the print this is not a big deal
I know it's probably not the answer you wanted to hear but do not think it will be changes in the near future about it
You can try the TweakAtZ plugin to handle with different extruder temps, flow rates, speeds, bed temps at an specified Z height
There is also a similar software made by a "ultimaker brother" but i can't find it. I will search the post and then I will add the link here...
Found it: http://umforum.ultimaker.com/index.php?/topic/4185-tweak-at-layer-number-windows-application/
Many thanks to tonycstech...
Recommended Posts
gr5 2,224
I've never used it. Some people claim it is an excuse for bad leveling but I think it's useful for people who print ABS. It allows the part to shrink slightly without pulling off the bed. It makes for a very ugly bottom on your part.
But now we have brim, heated beds, hair spray, abs glue, and glue stick for this.
I think because it is used by so few people that it gets lower priority.
Link to post
Share on other sites