Raft Top Layer Incomplete

[sethb411 1]

I have what I think is a similar issue. The 1st of the 2 "top" raft layers is the one affected. Cura simply leaves the layer partially printed. It only happens with certain parts. Also, it will not have this issue if I include another part next to it, or if I change the orientation a bit.

 

I attached an image of it and the .3mf file.

 

 

Partial Raft Settings.3mf

[sethb411 1]

Anybody else have this error in the Cura slicer?

[GregValiant 1,112]

I forgot to hit the submit button...

Thanks for the project file.  I moved the model away from 0,0,0 on the build plate and the problem went away.

On the Github site is bug report #13353 that describes this behavior.  I'll go ahead and link this post to that bug report.

 

[MariMakes 178]

Awesome, great troubleshootig @GregValiant.

The team is aware of the issue and has a ticket to the backlog with the intent to improve this.

I'll add your project file as a test case.

 

Thanks for the report!

 

[sethb411 1]

Ahhh, thanks for the extra explanation on that. At least now I see now how I can "fix" the issue by rotating the part (referencing the github bug report).

 

Thanks!