Jump to content
UltiMaker Community of 3D Printing Experts

Thingiverse - kein Konto-Zugriff mehr

ManAtArms

By ManAtArms
in Deutsch

 Share
Go to solution Solved by ManAtArms,

Recommended Posts

ManAtArms

ManAtArms 44

Posted
Posted · Thingiverse - kein Konto-Zugriff mehr

Mal ne Frage in die Runde:

 

Kommt irgendwer von euch in seinen Thingiverse Account rein?

Ich habe seit zwei Wochen keinen Zugriff mehr, Passwort Reset haut nicht hin und mit den Betreibern Kontakt herstellen geht auch nicht.

Ist die Site jetzt endgültig komplett hinüber oder hat mit der Fusion was nicht so richtig hingehauen?

Ich kann nicht mal ein neues Konto über Google einrichten.

 

Habe testweise Plugins deaktiviert, hat aber auch nix geholfen.
Thingiverse sagt mir außerdem auch dauern, dass ich meinen PopUp Blocker deaktivieren soll, obwohl ich die Site freigegeben habe...

    • Link to post
    Share on other sites
    Digibike

    Digibike 102

    Posted
    Posted · Thingiverse - kein Konto-Zugriff mehr

    Versuch doch mal einen anderen Browser, um das auszuschließen... Gibt es immer wieder mal bei verschiedenen Seiten, daß ein Browser plötzlich "zickt"...

    War da nicht auch was mit "gehackten Accounts..." kürzlich? Oder verwechsel ich das gerade mit einer anderen Seite?

    Gruß, Digibike

    • Like 1
    Link to post
    Share on other sites
    ManAtArms

    ManAtArms 44

    Posted
    • Author
    Posted · Thingiverse - kein Konto-Zugriff mehr

    Ich hab das mal im Inkognito Mode von Chrome probiert, da funzt es komischerweise, aber ich hab die Plugins im normalen Modus auch einen nach dem anderen abgecheckt und es funktioniert trotzdem nicht.

    Es ist auch merkwürdig dass Thingiverse mir sagt, ich soll meinen Werbeblocker ausschalten, obwohl für die Site keiner aktiv ist.

    • Link to post
    Share on other sites
    • Solution
    ManAtArms

    ManAtArms 44

    Posted
    • Author
    • Solution
    Posted · Thingiverse - kein Konto-Zugriff mehr

    Ok, Problem gelöst, es war ein Video-Download oder Farberkennungs-Plugin vom Marketplace.

    Dachte erst die Avast-Plugins blocken den Zugriff...

     

    Problem gelöst.

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 3
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.3 stable released

        UltiMaker Cura 5.3 stable released

        ArunC posted a topic in Ultimaker Cura,

        In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!
          • Thanks
          • Like
        • 22 replies
        MariMakes

        Picked By

        MariMakes,
      • Here it is. The new UltiMaker S7

        Here it is. The new UltiMaker S7

        MariMakes posted a topic in Official news,

        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,
      • UltiMaker Cura Alpha 🎄 Tree Support Spotlight 🎄

        Cura Alpha With New Tree Support 🎄

        MariMakes posted a topic in Ultimaker Cura,

        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 22 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...