UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Print Cores AA 0,4 does not heat up more that 4 deg.
Posted
· Print Cores AA 0,4 does not heat up more that 4 deg.
Does it fail in both extruder 1 and 2 slots? Do you have any other BB or CC cores that do work? Seems very unlikely to have so many faulty print cores so I would guess there must be something wrong with the cable that goes to the print head. Try opening the print head and inspect the cable connector for any broken wires or loose contacts.
Posted
· Print Cores AA 0,4 does not heat up more that 4 deg.
I would recommend opening a support case with UltiMaker Support directly and sending your machines log files.
The logs will likely tell Support what is going on with your machine.
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
Travis7s 26
Does it fail in both extruder 1 and 2 slots? Do you have any other BB or CC cores that do work? Seems very unlikely to have so many faulty print cores so I would guess there must be something wrong with the cable that goes to the print head. Try opening the print head and inspect the cable connector for any broken wires or loose contacts.
Link to post
Share on other sites
Dustin 161
I would recommend opening a support case with UltiMaker Support directly and sending your machines log files.
The logs will likely tell Support what is going on with your machine.
Guide here: https://support.makerbot.com/s/article/1667337561393
Contact here: https://support.makerbot.com/s/contactsupport
Link to post
Share on other sites