Updating a gcode file (G29) and recording it as a gcode one as well ?

[Domi1958 0]

• I have to include a G29 line to my gcode in order to avoid touching the bed each time with too much effort (close to break something).
  But the file I created can't be save in 'gcode' mode, but just in docx.
  How can I have this G29 added while keeping the gcode operationnal for my printer.
  Many thanks,
  Dominique

[rburema 26]

If you continue with the manual solution, alter and save the file via notepad or notepad++ instead of word, then save it over the original file.

 

Alternatively, you could also probably add a G29 either in a post-processing script (accessible from the plugins top bar menu in Cura), or even in the start gcode, in machine-settings (accessible via the printer/preferences).

[Domi1958 0]

Many thanks for your answer; I'm now understanding how to do, as you made it clear to me.

Good evening,

Dominique

[Domi1958 0]

CFFFP_Bouchon de banc de tour G29.gcode

 

Sorry to come back with it; here I attached the Cura gcode which is causing me the trouble of 'strong touch' of the bed in all the cases.

Just I added the G29 code earlier to check bed level before printing but this still not workable as the noze is forced in bed and I have to stop it in emergency.

Could you check the first lines in order to check my own.

Many thanks,

Dominique

[obewan 37]

You should do a G28 1st, then do G29 

If you want a 3 x 3 grid try G29 P3

[GregValiant 1,303]

Hi @Domi1958

I think what @obewan saw was this from your gcode file.

M82 ;absolute extrusion mode
G29 ; auto-level
G28 ;Home
G1 Z15.0 F6000

You need to switch the G29 so it is below the G28.

In Cura select "Settings / Printer / Manage Printer" and in the next dialog select "Machine Settings".

On the left is the StartUp Gcode box.  You can edit the code in the box so it's like this:

G28 ; Home
G29 ; auto-level

That way the printer will know where the nozzle is before it attempts to level.

[Domi1958 0]

Thanks to both of us. I'll change and test tonight.

Have a nice day