UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
Posted
· 3d models clipping through bottom of build plate
There's a bug in Cura 5.3 that makes the "Remove Empty Layers" setting apply when there is support material. Previous versions would simply ignore the "Remove Empty Layers" setting if supports are enabled.
Workaround:
* disable supports
* find the "Remove Empty Layers" setting and uncheck it
Posted
· 3d models clipping through bottom of build plate
I'd go a different way with this. Each of those models really have different needs so I separated them each to their own file.
For the "knife" file I've done as AHoeben suggests and fixed the Support. The knife is 1mm off the build plate. I added some horizontal expansion to the support so the tip would be supported.
Because the cylinder object is so tall I've used "Search and Replace" to change the Y acceleration at layer 650. Bed slinger printers can be rough on tall narrow objects so slowing down the accel on the Y axis softens the moves and keeps the print from being shaken loose and failing. The vertical orientation will allow those fine features around the cylinder to have much better definition. (BTW the cylinder had errors in the model. The one in the attached project file was repaired with MS 3D Builder.)
I rotated the ring so it's vertical. I think it will just print better than way. With the "Floor Distance" at 2X layer height the scarring from the support won't be as bad. That part does have a couple of features around the base that really could use support, but they are so small that the support can't get in there.
You don't have to do any of that of course, it's just another way to skin this cat.
One last comment...Your Support Flow and Support Interface Flow at 125% is really high. I generally run them at 90% to make the supports weaker and easier to remove. Putting them down thinner also allows the interface to cool faster and so the "real" model doesn't tend to stick to the interface as well.
Posted
· 3d models clipping through bottom of build plate
I’ve looked for the remove empty layers option but couldn’t locate it, I’m unsure of where it is. Do supports need to be turned off for it to show up or something?
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
ahoeben 1,981
There's a bug in Cura 5.3 that makes the "Remove Empty Layers" setting apply when there is support material. Previous versions would simply ignore the "Remove Empty Layers" setting if supports are enabled.
Workaround:
* disable supports
* find the "Remove Empty Layers" setting and uncheck it
* re-enable supports
Link to post
Share on other sites
GregValiant 1,342
I'd go a different way with this. Each of those models really have different needs so I separated them each to their own file.
You don't have to do any of that of course, it's just another way to skin this cat.
One last comment...Your Support Flow and Support Interface Flow at 125% is really high. I generally run them at 90% to make the supports weaker and easier to remove. Putting them down thinner also allows the interface to cool faster and so the "real" model doesn't tend to stick to the interface as well.
And now I'm going fishing.
Liftedbuild KNIFE.3mf Liftedbuild PULL RING.3mf Liftedbuild CYLINDER.3mf
Link to post
Share on other sites
Judgement_XX 0
I’ve looked for the remove empty layers option but couldn’t locate it, I’m unsure of where it is. Do supports need to be turned off for it to show up or something?
Link to post
Share on other sites