Problem at the end of every print

[NaGaNn 0]

Hi ! 

 

At the end of every print I make, the nozzle stops and doesn't go up immediately. So material keeps coming out the nozzle ans this creates this non desirable  over-extrusion. Do you guys have any solution ?

Edited July 19, 2023 by NaGaNn

[NaGaNn 0]

Anyone ?

[Dustin 144]

2 hours ago, NaGaNn said:

Anyone ?

You will need to provide considerably more information for anyone to offer any useful help for your issue.
 

• What model of 3d printer are you using?
• Have you recently preformed routine maintenance on your 3d printer?
• What filament type are you using?
• What version of UltiMaker Cura are you using?
• Can you share a UltiMaker Cura Project file with us that produces this issue?

[GregValiant 1,305]

Your print is seriously under-extruded as well.  

[NaGaNn 0]

On 7/25/2023 at 6:34 PM, Dustin said:

You will need to provide considerably more information for anyone to offer any useful help for your issue.
 

• What model of 3d printer are you using?
• Have you recently preformed routine maintenance on your 3d printer?
• What filament type are you using?
• What version of UltiMaker Cura are you using?
• Can you share a UltiMaker Cura Project file with us that produces this issue?

Hi, thank you for your answer, here are more informations :

 

- I'm using an Ultimaker 2 

- I did perform routine maintenance recently

- I'm printing with ABS

- My version of Cura is 5.3.1

- I can share a file if you want but this issue is with everything I try to print

 

Thank you for your time, i'm not used to forums so I appologize for the lack of information

 

UM2_Coupler Cover Plate 73_8mm x 43_3mm v1.3mf

Edited July 31, 2023 by NaGaNn