Need to disable skirt and adhesion

[msculenny 0]

I'm trying to make a 3d print, but ultimaker cura is automatically enabling Adhesion. I turned it off, but it turned on skirt. I know the point of skirt is to get some filament out before the main print, but my printer is a FLSUN v400, which already ejects some filament before the main print, so I don't need an extra skirt. How could I turn off Adhesion and skirt/brim? 

[msculenny 0]

Also this is my first post ever so apologies if I didn't pick the correct topic description. 

[GregValiant 1,287]

Turn on the "Custom" settings.  Under "Build Plate Adhesion" will be "Build Plate Adhesion Type".  The options are Skirt, Brim, Raft and None.  When set to "None" you shouldn't get a skirt.

You can also set the number of laps of a skirt.  The default is 3 laps but you can set that to 1.

[msculenny 0]

I don't wanna be a pain in the butt, but how do i turn on the custom settings?

[msculenny 0]

nevermind, I think I found it. Thanks!