The most important things are:
1 Prevent that, adhering to the filament impurities get into the material feeder.
2 A room with low air movement should suffice.
3 Prevent large temperature changes.
3 No nicotine / tar settles everywhere, above all, to the fans, but also to the mechanics.
4 Regular maintenance of the machine: oiling, greasing, inspect.
5 Have fun during printing.
We have three cats.
Markus
yeah so basicly don't use it at a place people chain smoke that's what I thought (and means i'll have to find a way to have someone else babysit my UM2 for a while.
problem with the cats is I have a persian with long white hairs which are spraying all over the place so the printer room is gonna stay closed
thanks !
Recommended Posts
mnis 11
The most important things are:
1 Prevent that, adhering to the filament impurities get into the material feeder.
2 A room with low air movement should suffice.
3 Prevent large temperature changes.
3 No nicotine / tar settles everywhere, above all, to the fans, but also to the mechanics.
4 Regular maintenance of the machine: oiling, greasing, inspect.
5 Have fun during printing.
We have three cats.
Markus
Link to post
Share on other sites