The left blue clip you mean? Because that blue clip is black
I'm pretty sure it's as far as it can be, I think I used tweezers to push it into place, and I think it snapped into place. (it's quite hard to get it in properly in an already assembled head with 2 tubes sticking out of it) But I'll double check to be sure.
Recommended Posts
alaris2 1
that's very up.
when I put the blue circlip on the tube I noticed two things.
1) you can put it on and all looks good. but you haven't put it on properly - force it on with pliers until it can grip no more.
2) you know you've got it on properly because it forces the bowden tube up by exactly 1mm. originally I tried to compensate for this by pushing the tube an extra 1mm down (this actually makes matters worse) thinking it would lead to a leak, but it doesn't. I can't explain why.
I've been assuming people are not putting the clip on tightly enough and this leads to bowden tubes popping off and all the other problems complained about. maybe that's not the case after all..
Link to post
Share on other sites