Jump to content

Cannot find "jog" & "temperature" at "Print " in Cura 14.06


3d_zxvoyager

Recommended Posts

Posted · Cannot find "jog" & "temperature" at "Print " in Cura 14.06

Hello,

I have using the Cura with my Solidoodle3 since last year..

Yesterday, I have updated to Cura 14.06 and I have few problem with "Print...

When I press "Print" from the menu bar the Cura 14.01 displayed as below.

gallery_15899_973_27620.jpg

,

There are "Temp", "Jog", "Speed", "Term" tabs on the "Printing" dialog.

But Cura 14.03 or later, I cannot find above tabs on "Printing" dialog.

Are these tabs removed from the "Print" ? (Please refer below)

gallery_15899_973_43420.jpg

Is it removed from the "Print" function?,

If it true how to move the nozzle and adjust the temperature of the nozzle & bed manually?

P.S> The print function of Cura 14.06 works fine to me

(I mean I can print out the with out any problem.)

 

  • Link to post
    Share on other sites

    Posted · Cannot find "jog" & "temperature" at "Print " in Cura 14.06

    BTW, I never succeeded to obtain a window for printing, after clicking on menu --> file --> print.

    It does nothing, if there is no a model , or if there is a model it appears a menu to save the gcode file. That's all.

    With all the Cura versions I used I have the same problem. Of course the printer is on and it is connected to the computer.

    What I am doing wrong?

     

  • Link to post
    Share on other sites

    Posted · Cannot find "jog" & "temperature" at "Print " in Cura 14.06

    If you're using an UM2 that option will not be available by default as printing via USB on the UM2 is not officially supported. You can however change the Gcode flavour to RepRap and that should make it available.

     

  • Link to post
    Share on other sites

    Posted · Cannot find "jog" & "temperature" at "Print " in Cura 14.06

    Sorry for my late reply.

    Now it works fine!!.

    Thank you very much for your help

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
        • 18 replies
      • S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
        • 0 replies
    ×
    ×
    • Create New...