Deformed dragon shape

[geert 0]

Hello guys,

As I try to make a dragon figure, the following happens: The print deforms gradually like the printing plate is slowly moving but the print did not move from its spot. It started good and then starts warping. I suspect it is some kind of software problem.

Does anyone knows what the reason is or how I can solve this.

Thank you in advance.

 

[IRobertI 521]

You could be having some friction between the motor pulley and the wall of the printer or you could have some loose set screws. You can find a bit more info here:

http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide#leaning

 

[geert 0]

Thank you , this helps a lot.