Thanks for the reply: I have checked all the wiring only way it could be a short is if it is within the metal shielded cable or in the head of the thermister. Roughly what resistance should I see accross the open terminals of the Thermister (i.e. removed from machine ). Anyone know what the specs are as I see no part numbers etc?
I have removed the thermister and checked the resistance across it and its 1.2 Ohms @ about 20 degrees, I am guessing it should be alot higher.
Anyone got a partnumber?
Recommended Posts
mr_seeker 0
MAXTEMP means that there is a shortcut or you connected the cable wrong. It has to do everything with the temperature sensor.
Link to post
Share on other sites