Jump to content

stick (glue) together (PLA to PLA)


ammar

Recommended Posts

Posted · stick (glue) together (PLA to PLA)

Hi everyone,

I built an underwater robot. I used UM2 to create the shape. The shape of my robot like as the shape of a fish body with dimensions (65cmx25cmx15cm) and also has similar surface properties. The thickness of the outer skin of the robot approx. 3mm.

The robot consists of several components (parts) that I was created using a 3D printer (Due to UM2 has small Dimensions).

I used PLA filament to produce the parts of robot.

After finishing of the printing, I got more of eight parts. (Each part has approximately the following dimensions 13cm, 18cm, 3mm).

Of course, now comes the important aspect "stick together" (PLA to PLA)!

I need your advice to chose the best stick of my state.

I prefer some of the points to be the stick like:

 

1- To be no super glue, so that the parts of the robot to remain in their position to each other over a longer period still be moved.

 

2-The viscosity of the stick should be similar to honey and not the water.

 

What stick would you recommend in this case for my robot?

 

 

best regards

Ammar

IMG_20141023_205951.jpg

 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...