Jump to content

Ultimaker 2 - fantastic condition (basically brand new) with fillament

neo-ninja
 Share

Recommended Posts

neo-ninja

neo-ninja 1

Posted
Posted (edited) · Ultimaker 2 - fantastic condition (basically brand new) with fillament

Hi All,

I have an Ultimaker 2 for sale I bought around 1 month ago second hand from a friend who used it for a couple of projects and then left it sitting not being used, and since then I purchased a whole load of filament for it listed below.

I have done what I needed it for and due to soon moving house I need the money. I also found the world of 3d printing a little fidderly for my liking. But as you know because you are looking here the Ultimaker 2 is the best on the home market currently.

All filament is high quality from Dream3d

I am looking for around £1,375 with all filament.

Ideally collection only I am in Surrey, UK

Orange most of a 90m spool left

Blue most of a 90m spool left

Grey - basically brand new

dark blue - brand new 90m spool

yellow - 20m estimate - was a sample spool

black - 20m estimate - was a sample spool

white - 20 meters estimate - was a sample spool

orange - 10m sample

glown in the dark - 10m sample

red - 10m sample

purple - 10m sample

Some images below from my listing that I will put up later this week if it doesn't sell:

$_57.JPG

$_57.JPG

$_57.JPG

$_57.JPG

$_57.JPG

$_57.JPG

Edited by chin
  • Like 1
Link to post
Share on other sites
Jmakers

Jmakers 0

Posted
Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament

 

How many hours has it been running. Also quill you ship to the U.S.?
sorry auto correct.. I meant will you ship to the U.S.
    • Link to post
    Share on other sites
    neo-ninja

    neo-ninja 1

    Posted
    • Author
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament
    How many hours has it been running. Also quill you ship to the U.S.?

    sorry auto correct.. I meant will you ship to the U.S.

    It must auto reset the timer when you update firmware, but based on what my friend has done which he left on the memory card and based on what I have done probably around 30 hours which sounds like a lot but really is nothing.

    the box and filament is huge so I could ship to the US but I don't really know how and I would imagine it would be crazy pricey. Do you have any recommended shippers?

    • Link to post
    Share on other sites
    • 2 weeks later...
    lukem96

    lukem96 0

    Posted
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament
    Quick bump on this still for sale.

    Would you accept £900 for the printer?

    As there are new ones selling on ebay for around £1200

    Thanks!

    Luke

    • Link to post
    Share on other sites
    65fastback

    65fastback 0

    Posted
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament
    Quick bump on this still for sale.

    Would you accept £900 for the printer?

    As there are new ones selling on ebay for around £1200

    Thanks!

    Luke

    new ones on ebay are 1350ish

    • Link to post
    Share on other sites
    neo-ninja

    neo-ninja 1

    Posted
    • Author
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament
    Quick bump on this still for sale.

    Would you accept £900 for the printer?

    As there are new ones selling on ebay for around £1200

    Thanks!

    Luke

    new ones on ebay are 1350ish

    Personally I would stay well clear of those, there was a couple of sellers selling them before when I was looking and buyers never actually got them... or got them and they weren't new.

    Try asking them about the warranty and receipt details, which is why you are buying them new. You will find you don't get answers very quickly...

    • Link to post
    Share on other sites
    neo-ninja

    neo-ninja 1

    Posted
    • Author
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament

    Just to add I am open to offers, like I said the printer has barely been used and has a lot of filament.

    I have started printing again the last week or so, so the hours will go up slightly.

    • Link to post
    Share on other sites
    lukem96

    lukem96 0

    Posted
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament
    Quick bump on this still for sale.

    Would you accept £900 for the printer?

    As there are new ones selling on ebay for around £1200

    Thanks!

    Luke

    new ones on ebay are 1350ish

    Personally I would stay well clear of those, there was a couple of sellers selling them before when I was looking and buyers never actually got them... or got them and they weren't new.

    Try asking them about the warranty and receipt details, which is why you are buying them new. You will find you don't get answers very quickly...

    Yes I agree, I'll be doing a lot of homework before purchasing off Ebay! I'm an 18 year old entrepreneur with a very tight budget for my business so anything I can do to reduce my start up cost will help me a lot. I don't mean to be insulting with my offer, but I will be able to collect. If you change your mind and want a quick sale, just call me on 07511609844.

    • Link to post
    Share on other sites
    bonraduk

    bonraduk 0

    Posted
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament

    Hello very interested in buying your machine would £1300 be ok. It could be collected this weekend and money transferred.

    • Link to post
    Share on other sites
    neo-ninja

    neo-ninja 1

    Posted
    • Author
    Posted · Ultimaker 2 - fantastic condition (basically brand new) with fillament

    HI Guys,

    Quick update I have litrally had a job come through I am going to try and complete, should be 5-10 hours printing over the next two days or so. If it goes well it will be the start of more business so I wont be selling.

    If it doesn't then I will 100% be selling but it means I will let you all know in around a week. Currently Bonraduk has first dibs if it comes on the market again in a week.

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 0
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.3 stable released

        UltiMaker Cura 5.3 stable released

        ArunC posted a topic in UltiMaker Cura,

        In this stable release, Cura 5.3 achieves yet another huge leap forward in 3D printing thanks to material interlocking! As well as introducing an expanded recommended print settings menu and lots of print quality improvements. Not to mention, a whole bunch of new printer profiles for non-UltiMaker printers!
          • Thanks
          • Like
        • 56 replies
        MariMakes

        Picked By

        MariMakes,
      • Here it is. The new UltiMaker S7

        Here it is. The new UltiMaker S7

        MariMakes posted a topic in Official news,

        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
         
         
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
         
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
         
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.
         

         
        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,
      • UltiMaker Cura Alpha 🎄 Tree Support Spotlight 🎄

        Cura Alpha With New Tree Support 🎄

        MariMakes posted a topic in UltiMaker Cura,

        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
         
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 29 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...