Jump to content

tukl

Dormant
  • Posts

    36
  • Joined

  • Last visited

    Never

tukl's Achievements

0

Reputation

  1. Thank you all guys! I contacted Marrit Hoffmans for a new cable, I hope this helps!
  2. Hello again, here is the picture: I hope they help you!
  3. Do I have to disassemble the machine, i.e. do you need a view on the electronic board?
  4. I send you the file. After the fifth try, it came to a complete print, so I think it is not the gcode itself. I had this in the past several times with other files, but not that often like now...
  5. Hi! in the last few days I experience a lot of crazy z-jumps on my UM2. They can happen everywhere when you print the same file multiple times. After a while, the z-axis increases a bit too much and the print is gone... I made a video: have a look at 3:10, the jump occurs at 3:16. I tried reformatting the sd card, change of the sd card.. any ideas why this happens? Thank you so much! Sebastian
  6. Are there plans for adding an on-screen-change-filament-feature? Would be very cool! I have a few difficulties changing the filament by myself on an UM2, and in addition there is always a bit filament left in the noozle which i cannot push out by hand (like move material feature)!
  7. Hallo! Also wir haben mal probeweise dort bestellt und es hat super geklappt, schneller als bei anderen deutschen Händlern! Die Qualität ist wesentlich besser, die Drucktemperatur ist geringer, alles super, wir werden wieder bestellen (leider aber keine Sammelbestellung möglich)! ich kann nur raten: bestell mehr als das Fun-Pack (das haben wir auch, aber da die Farben genial sind leider auch schnell aufgebraucht), dann rentieren sich auch die Versandkosten! Viele Grüße
  8. for me the best tip was the machine oil! It was the ultimative tip, since I put a few blobs into the tube before inserting the flexible PLA everything is fine, even printing with 50mm/s...
  9. We had a couple of faberdahserrys filament and are printing with 210°, 0,1mm Layerheight and 50mm/s on an UM2! Very nice results, much better than filament from igo3d or even Ultimaker!
  10. tukl

    Ultimaker 2 Nozzle

    Das ist ja mal ein Rückschritt... danke für die Info! Das habe ich fast befürchtet...
  11. tukl

    Druckbild

    Also wir sind mit dem Ultimker Filament auch sehr zufrieden! Ich warte noch auf Rückmeldung von iGo, mal schauen was sie mir anbieten...
  12. Hallo, hat jemand eine Ahnung welche Nozzle der UM2 besitzt? Ist das die gleiche wie beim UM1, sprich kann ich diese im Webshop von UM bestellen? Dort wird nur "Original Ultimaker" angegeben in der Beschreibung, denke das wird der UM1 sein! Ich habe das Gefühl dass seit ich einmal ABS gedruckt habe nicht mehr genügend Material aus der Spitze kommt, obwohl ich schon mehrere Objekte gedruckt habe. Kennt jemand das Problem?
  13. tukl

    Druckbild

    Also wir haben über 10 Rollen von igo3D gekauft, und leider die gleichen Probleme! Wir kommen nicht auf einen grünen Nenner.... Hat noch jemand solche Erfahrungen gemacht? Wir haben igo3D bereits letzte Woche gesschrieben, aber leider keine Antwort bekommen...
  14. Moin! ganz kurz - in der Pfalz, bei Kaiserslautern, gäbe es auch einen UM2 zu bestaunen falls Interesse besteht, weiß nicht wo du herkommst!
×
×
  • Create New...