gizmo999

Ok so have tried the download button on google crome ,tried a different computer win7, but nothing happens . Or does it save to clipboard or something . i can see the built log ,and under download button i can see ;Firmware MD5 hash: 121bd6c61799b709e9ca93b5561bd8cf. shut i see a popup? when pushing download button? or shut i hook up the ultimaker on the computer?

Hello just bought simplify 3d and had a question ,i copied the starup gcode and end gcode from cura into simplify . but when i start a print the printhead extrude 8 mm of filament and then the printhead splashes in to the extruded filament an go to the center of the build plate etc. printing works fine . With cura when print starts it extrude 8 mm of filament the it goes to center en higher the buildplate at the same time ,i realy like that behavior better! on my ultimaker plus. Do you guys/girls know how to manage that in simplify 3d?

Yes, it is built by default. (There is no option to turn it off as it does not do anything if you do not use it...) thanks !!

ok will try another browser. is the led function alo available with the builder firmware ? its not an option when building the firmware

Hi is there a ready to download firmware for the um plus with led function? I tried to use the online builder but after build the firmware and press the the download button nothing happend i cannot download it . Im running win 8.1 maybe that is the problem. thanks in advance

I saw they are selling it on ebay , anyone tried it?

I wanted to print a handle for my umo + but couldn't find one with the Original company logo so i made one :grin: if someone like to download it its on: (http://www.thingiverse.com/thing:615987)

that realy makes a difference, reduced it with 100ma step at a time ,so far so good not missing steps and runs fine

yes thats wat i meant ,the extruder motor is also very hot and noisy when retract so i wil reduce it a little and try it out ..thanks!

runs smooth ,i had the same thing with my prusa and adjusted the current to the stepper motor a little and realy helped alot. so i was wondering where the magic numbers are but i cant find them in the firmware,is it in config.h? or stepper.h? maybe someone knows

Hi does anybody now where to adjust the current to the stepper motors on a umo + motors are getting hot . i looked in the firmware but don,t know where to look (wat page) i don,t see it in the configuration.h

did a littllebit of remix and some of myself ,i used nylon rings in to my models. if you like i can try to put the files online.

so i did the bearingcap mod on my new umo+ and really made a difference :mrgreen:

2.gizmo999-full set

this code is not usable on the umo plus ,but with some adjustment to the code it wil work for me

thanks will try it out :cool:

Finished mine yesterday ,it is printing really nice and very very quiet! build it in 15 hrs (after visiting the local hardware store)

Hi im looking for the g-code for the bed level wizzard ,i like to have it on my sd card and want to modify it a little so it does the movent part only.

had the same thing ,but managed it,also alot of bolts and nuts missing :-|...but still building

yes i think its ok its a miner space ...but thanks for the quik reply :cool:

Hi folks im busy building my umo plus,and came up with a question. I,m busy with assembling the hotend and there is a wooden piece 8b and the aluminium plate im having a gab between those two its a gap +/- 1 mm is this normal?(between the plates sits the peek)

Received !!!

ok glad its back in the Netherlands now :mrgreen:

Makerfarm prusa i3

no ....but i,m feeling like i had a cold shower