Jump to content
Ultimaker Community of 3D Printing Experts


  • Posts

  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Erkan3D's Achievements



  1. These are little rings with a height of 5 mm and a diameter of 20 mm. Distance from my nozzle tip to the base is about 7.5 mm so it is not possible to hit the printed parts with printhead unless the nozzle moves over already printed objects. I set the gantry height to 99999 but it didn't change anything. I think I should be able to make lots of these rings with a suitable print order simultaneously. Can anybody help me about this? Thanks in advance!
  2. I want to print one at a time while using both extruders, but the option is disabled when I choose 2 as the number of extruders. What can I do?
  3. Did you find any solution? I am having exactly the same thing with UM2
  4. Attached a view in cura It is an UM2 with a 0.15 mm nozzle Yes it is a cube and I use infill patterns. Line width is 0.15 mm. Speed is 45mm/s What I want is squares with equal height and connected walls. Thanks!
  5. I am printing something with little squares. But the problem is Ultimaker2 is not combining the vertical and horizontal lines. Using Cura 4.0.0 I guess that it is trying to prevent printing over an already printed area but how can I fix that? Thanks in advance! 🙂
  6. Well I am printing two different objects and I need two different layer heights...
  7. Hi There I was able to choose different layer heights for extruder 1 and 2... I just updated to 3.3.1 and now I cannot set different layer heights for each of them. Any ideas? Should I downgrade?
  8. As you can see in the image, the printer prints the first line of BRIM with second extruder. I want it to be printed with only the first nozzle (yellow one) Help!?
  9. Yeah but I am using 2 different extruders and scanning objects. It is a bit complicated. I need thicker brim layers.
  10. Can I increase thickness of Brim layers? Lets say I want 3 layers (01. x 3 = 0.3 mm) of Brim around my object. How can I do that?
  11. That worked! I wish there was a setting to print in the air but I can use for now... THANKS!
  12. Here I attached an image. In solid view it is in the air but when it is time to print, it ignores the Z offset and prints on the bed.
  13. Nope. I want to extrude the same amount.
  14. It extruded very high amount of filament since the volume get bigger
  • Create New...