Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Everything posted by V3DPrinting

  1. Hi ahoeben Thanks for the info. If I create a custom profile for the material, it should show up in the manager. Currently it is not the case, that's the issue. Is it related to the install ?
  2. Hi Is there anybody out there having the same issue ? Thanks David
  3. Hi there Has anybody a clue on how to solve this issue ? Thanks David
  4. BTW exporting materials from my previous install and importing again in my fresh install didn't worked. I don't know if it is related.
  5. Hi Maybe it has been already posted, but some queries haven't reported my issue. I'm running Cura 3.04, from a fresh install on OS X 10.12 (Sierra) after having the below issues migrating from 2.7 to 3.0 then 3.04. I have created or duplicated materials from Ultimaker materials to create for example ColorFabb XT. If I prepare a print with Ultimaker CPE or Generic CPE, I have some generic print profiles showing up in the dropdown list or in the Profile Manager. As soon as I select my custom material, no more profiles, nor options to create / update profiles. By miracle, I have manag
  6. Hi Neotko, I've missed the post in duet3D forum. Indeed it would be good for Cura to manage properly with G10 commands the temperature when in RepRap Firmware mode. Doing a parser is an option, but I have no time for that. It is pretty straight forward to replace any M104/ M109 by G10 Sx Rx and M116, so to keep the advantages of Cura temperature management. So I believe that I'll stay with S3D for my Mankati and use Cura for the new UM3. It seems that there are some cool features in Cura specially for dual extrusion, but the multi processes as in S3D are not implemented, not cool at
  7. Hi to all I'm new on this forum being very soon owner of a UM3 Extended. I currently print on an highly modified Mankati XT Plus with a Duet3D board using S3D for more than a year an half. I'm trying to setup Cura for my Mankati, but facing some issues in the start script. The Reprap Firmware manages temperature settings using G10 command for both active and standby temperature. M104/M109 command only sets the active temp. Changing tool will set the initial one to standby, therefore temperature will drop down to the ambiant. Cura is managing the temp for both active and standby extruder
  • Create New...