-
Posts
741 -
Joined
-
Days Won
4
Content Type
Forums
Events
3D Prints
Posts posted by UlrichC-DE
-
-
53 minutes ago, zerspaner_gerd said:
Und deine genannte "einfachere Methode" ist für einen der nur Paint hat das aller gleiche in blau und keine Erleichterung.
Ja nun, wenn er einen einzelnen Dialog mit -ALT und Druck- in die Zwischenablage schiebt, kann er diesen im Anschluß mit -STRG und V- ins Forum kopieren. Paint bzw. jpg wird dazu nicht benötigt.
So der Gedanke.
Win7 wird nicht weiter Supported / wie schnell doch die Zeit vergeht. Ich habe es aber auch noch auf einem Rechner. Sogar noch ein paar XP Rechner. Ist ein Fallback für die tsd Treiber für ältere Geräte die ich nicht auf Win10 zum laufen bekomme.
Viele Grüße
- 1
-
Hallo
ja die Option kenne ich. Das habe ich aber nicht aktiv, weil ich das für mich unpraktikabel ist. Ich arbeite mit verschiedenen Anwendungen zur Bildbearbeitung. Möchte also nur Screenshots erstellen und instant bearbeiten. Voll oder Dialogweise.
Wenn dann ein Dialog / Auswahl aufpoppt liegt das für mich nur als Hindernis auf dem Weg.
Ich gehöre zu den Leuten die gerne mit der Tastatur arbeiten. ALT-Druck, STRG-V (ohne Doppelklick und Maus-Menüs)
1 hour ago, zerspaner_gerd said:Also aus meiner Sicht finde ich meine Methoden
Dann bleib dabei 😉
1 hour ago, zerspaner_gerd said:oder übersehe ich was
Vermutlich arbeiten wir verschieden am Rechner. Ich erstelle zB. selten Screenshots für Forenbeiträge.
Viele Grüße
-
Huhu
das geht theoretisch einfacher.
Mit der Druck-Taste werden bekanntlich Screenshots erstellt.
Wenn man dabei noch gleichzeitig die ALT-Taste gedrückt hält, wird dabei ausschließlich der aktuell aktive Dialog berücksichtigt.
Viele Grüße
-
That is perhaps a misunderstanding. An up-to-date Cura is required to use PETG.
PETG support has been available since Cura 4.8, currently 4.9.1. If you select PETG in a current Cura, its profile is transmitted to the printer with the print job.
The printer firmware itself supports everything and nothing, so to speak.
Many greetings- 1
-
Hallo
kannst du mal das Projekt exportieren?
Denke so ist es am einfachsten. Dein Screenshot ist nicht lesbar.
Viele Grüße
-
25 minutes ago, auc said:
Was genau meinst Du mit "lade den gCode direkt hoch"?
Den gcode (ist ja eine schlichte Textdatei), der zum Drucken genutzt wird, hier im Forum posten. Als Dateianhang zum Beitrag. Er vermutet das ein Sonderzeichen bei ist, das den Parser durcheinander bringt. Denke zumindest das er das meint. Anderes macht für mich keinen Sinn.
Bei deiner Auflistung vermisse ich..
mit Druckluft den SD-Kartenslot auspusten. Zur Not tut das auch Druckluftspray.
Viele Grüße
-
44 minutes ago, HMax said:
Cura 4.9.
Besser 4.9.1 nutzen. Die 4.9 scheint ein Schnellschuß gewesen zu sein.
-
Before I forget.
I also do the rewinding sometimes.
With this: https://www.youmagine.com/designs/rewind-adapter-for-ultimaker-spools
Many greetings
-
I have had various problems in the past with TPU and material station or Bowden feeder.
If the tension in the feeder is too high, the material winds up in the feeder and leads to errors.
I print TPU mainly with 0.8 nozzles. Because that way the feeder has to build up less pressure.
Another thing is... if I have problems with TPU, I immediately clean the print head thoroughly. This is because the TPU likes to paste the print head above the print nozzle. If it is not cleaned, this causes a whole host of problems.Many greetings
-
Ich würde auf verdacht eine andere SD-Karte benutzen. Ich hatte deswegen schon ähnliche freezes.
Viele Grüße
-
1 hour ago, Smithy said:
Du wirst nichts finden, da dies eine Funktion der Druckerfirmware ist.
Würde noch weiter ausholen. Das sind die Firmwarefunktionen des Bundles. Normalerweise entlädt er an der Stelle das Material aus dem Druckkopf. So ca. 5cm. Da er ohne Materialstation diesen Code überspringt, bleibt am Ende trotzdem das Warten auf die Abkühlung.
Wobei das Sachen sind die normalerweise nicht stören. Weil man, so lange das System noch heiß ist, weder das Bauteil von der Platte reißt noch die Platte wechselt. Macht beides in der Regel keinen Sinn. (Außer bei TPU vielleicht)
Das manuelle Abbrechen würde ich nicht machen.
Sinnvoll ist eher, die Türen zu öffnen, damit die Wärme besser abzieht oä. .
Viele Grüße
- 1
-
Hello
In the material station you lose approx. 2.14m per cut.
At 3Kg, that's two additional cuts (4.28m).Just as a hint 🙂
Best regards
-
Hello
In the early days I had also pursued such projects with the material station.
Thank you for the picture. It gives you the idea that maybe the Z-axis is dirty.
But it could also be due to the printer's firmware.The current firmware 6.4 only makes a clean deprime on -abort- with Ultimaker filament. So if you work with generic Filamant, it can theoretically come to such effects. The next version should fix this.
Now, of course, I don't know if you are working with generic filament. And I don't know if -abort- off is the same as changing the material. Just a suspicion.
Many greetings -
If you have Cura 4.9 installed, you should change to 4.9.1. With 4.9 I also had problems with the prime blob. It extrudes too little at the beginning. I don't lose any layers at the moment, although I mainly work with 0.8 nozzles.
Many greetings
-
Hallo,
der Grund ist das er wartet, bis der Druckkopf abgekühlt ist. Denke das ist so ein UVV Gedanke.
Hole dir auch so einen Drucker. Der entschleunigt dein Leben 😆
Viele Grüße
-
On 5/20/2021 at 1:22 PM, sj3fk3 said:
Please give it a try, you should see much beter results.
I have now had a chance to test the print break with the 6.4.
It worked fine with Ultimaker filament. With other filament it is still noticeable.Many greetings
It is perhaps easier to understand this way 😆
-
I have now had a chance to test the print break with the 6.4.
It worked fine with Ultimaker filament. With other filament it is still noticeable.Many greetings
-
Thanks for the information.
I hadn't read about the titanium plate.I often use 4mm aluminium plates on the S5. That also works well. But only for nylon and polycarbonate.
Many greetings
-
Just use hairspray. It is also water-soluble. The chemical base aka liquid polimer is similar.
Many greetings
-
- Der Riemen reibt an den Bordscheiben des Riemenrades
-
2 hours ago, CalebPetersenPhD said:
I couldn't find any maintenance instructions--what do I do here? Does the black, plastic sleeve bearing need to go over the shaft as it sits inside of the ball bearing?
Hello
the black plastic bushings are spacers. They must be seated between the ball bearing and the belt pulley after assembly.
Theoretically, it looks the same everywhere. Only the lengths of the plastic bushings are different.
Many greetings
- 1
-
Du hast in "Special-Modes:Spiralize Outer Conture" einen Haken.
Also druckt er es als Vase bzw. ohne InfilViele Grüße
- 1
-
1 hour ago, Bastler1508 said:
Mit Notepad++ werden nur irgendwelche Zeichen angezeigt.
Du kannst die 3mf Datei mit einem ZIP-Programm öffnen.
Umbenennen in ZIP und dann entpacken ist am bequemsten.
Viele Grüße
-
Mache, wenn möglich, ein Bild von der Platine. Damit kann man dann erkennen welches Board du hast. Denn es gibt mehrere Versionen.
Wie @gr5 geschrieben hat, kann man vielleicht die Software anpassen. Wenn ein Port erkennbar frei ist, stehen die Chancen gut.
Bzw. das Routing/Mapping anpassen und ein neues Kompilat erstellen. (So heißt das zumindest in meiner NichtDrucker Welt) Für den Fall das du selbst ein paar C Kenntnisse mitbringst und lust hast eine AVR Umgebung einzurichten, habe ich mal geschaut.
Dort kannst du das Mapping/Routing theoretisch anpassen. (Ich kenne die Software aber erst seit 5 Minuten. War nur neugierig. @tinkergnome weiß es vermutlich besser. )
https://github.com/Ultimaker/Ultimaker2Marlin/blob/master/Marlin/pins.hViele Grüße
merkwürdige Füllung bei Cura 4.9
in Deutsch
Posted
Hallo
wenn ich einen Beitrag schreibe, kann ich in dem Feld mit -STRG und V- bilder einfügen. Sozusagen anstatt Buchstaben zu schreiben. HTML4 Komponenten können das. (Ist vl. abhängig vom Browser 🤔) Das funktioniert jedenfalls ohne Dateiauswahl und ohne Dateinamen.
Viele Grüße