mcmuffin6o

I have videos to show you! We will see when I can get around to uploading them. Should I just zip them so that they can get through?

Damn, that's really annoying. I appreciate you going through my files though, and my search is narrowed. Maybe I'll try updating the firmware again, I want to get rid of the primer line that marlin enables by default anyways, because it does not account for nozzle diameter and if I wanted to do finer prints I would prolly take a dookie on my extruder motor before it even got started. Thanks again!!

Got to upload these quicker than I thought :)

Thanks! I have attached the .gcode and .3mf files. AL.3mf AL.gcode

Ah, yes. I see that option on my posts. Hopefully @jax200 sees this

How do we mark stuff as solved?

This was me, sorry. I replied in that thread just now. After updating the firmware I should also mention that I have to manually pause when the print head moves out of the way and manually resume from the screen interface. I also started encountering layer shift issues though unfortunately... Is there any general advice you have for ender 3 pro owners that might fix some of my problems? I am a full time aerospace engineering student and would like to spend less time fixing my printer than printing with it, since I don't have much spare time as it is. I am tempted to give up and buy a quality machine.

Shoot, sorry everyone! I have an Ender 3 Pro and I upgraded to Marlin 2.0.7.2 from whatever came with the printer.

My Ender 3 Pro shifts on the y-axis only for certain prints in certain configurations, but when it shifts, it does so consistently, indicating that it is likely a software problem. Attached are pictures of three attempts to print an A and an L. I have laid them out as I printed them to show the effects of my rearrangement within the software. The last attempt I let run all the way until the stop at layer command I put in post-processing, but the other two I stopped as soon as they shifted. I am printing translucent red PETG on a 1 mm nozzle with the attached speed settings. I'd appreciate some help with this! Thank you all so much in advance.

Update: Updating the firmware fixed it. My printer was just ignoring the pause command!

Update: Updating the firmware fixed it. My printer was just ignoring the pause command!

bump

Thread not solved, Vikefan93 what did you do??

bump

I did what was shown in the video and it didn't work unfortunately

Aha, so I did in fact select "by layer." I also tried M0 as the Marlin index said M1 was deprecated. I shall try M1.

Howdy Y'all! I can't get my Ender 3 Pro to pause to allow me to insert magnets into my prints. I use the post-processing pause at height feature and set it to the last layer I want printed before insertion, but it only moves the nozzle out of the way for a few seconds before resuming. This wouldn't be a problem if I didn't have a lot of magnets to insert, but I simply cannot get them in on time and would rather not have to stare at my printer for hours to try. Any help is much appreciated! I read some things here and there about firmware already, so if that's the case is there a guide to tinkering with that? Thanks so much!

Would you mind explaining a little further? What does TFT stand for? What do you mean by "board?" Which Marlin tweaks did you make? I am having the same problem and would like to figure it out.