zakeen

I just bought a new one so not looking anymore.

I have a 2+ I am thinking of selling. I am half keen on selling it. May I ask what you expect to pay?

I've owned a few of these machines and there have been updates but also some slight hardware updates. The good thing about buying a demo that was used regularly is they would have maintained it and did the updates that were required on a hardware level. Anything that would have needed to be replaced would have. I would not be afraid of it, if priced right.

I have an Ultimaker 2 extender + for sale. I am located in CZ. I would prefer pickup sale. I travel a lot within EU, so I can possibly meet a country neighbouring and deliver. Works perfect, no problems. Reason of sale. I currently have an S5, I am looking at buying another S5 as I want to speed up my production speed by 2 times and I really need dual extruder for PVA supports. Currently the printer only prints jobs that require no supports. One advantage the U2 over the S3 and S5 it does not have self leveling bed. I actually dislike this feature because once the bed is leveled perfectly and you need to print a very small part for testing, it does not need to run this procedure every single print..... so on really small 15min prints its a huge time saving. Also the ability to tune a print while loading is nice, S3 and S5 you must wait around to all these self test are complete before you can manually change a setting. So with the U2 you can just start a print, adjust the settings is need be and walk away. Reason for the print bed to be that colour. Thats paper glue. I always leave it from last print, this printer does small jobs and on this printer the glue stick works nicely for me. It does not really include anything as I am not getting out of the market of printing, so all my extra's I keep for the S5, but I can throw in some figment after we speak..... I have heaps of unused and different colours......

As the title says, looking at buying another s5. I prefer to inspect it. So if you have one in EU I dont mind driving a day to have a look. I am located in CZ.

SOLVED: There is a bug.... In my first post I wrote a list of what I did to try and solves this. It seems they have fixed something in an update half way through my solving because the end result the bug is: With my Gcode, plus Flow Sensor unplugged and Flow Sensor disabled this errors shows. Also, with this exact Gcode on a different S5 with Flow Sensor disabled and unplugged it shows the same error. We have yet to identify what is wrong with my Gcode. With the Distributor's Gcode everything works fine and they were only able to get my Gcodes working if Flow sensor was plugged in and not disabled. So now I can use it with this in this state. I did try this anyway at the start, but they think when I updated it, it changed something. We dont know if its when I updated Cura or the S5. But I have it working 😄

The flow sensor has not been working for the life of the printer. I never worried about it as I cam from the UM 2 and it doesnt have one. I have disabled them both after following: Thanks also for the recommendation Priddy,

Do you mean this? This was done directly after it crashed and only way was to restart it then capture the log files then. cap_Ultimaker-00b763_2019-02-14_10.20.13_N0_X186.5Y213.5.zip

Do this at your own risk. You can extend the printer build plate size in the settings you have posted. I also ran into the same problem as you and increased it just 5mm and that was enough. This worked on the UM 2+ I have never tried on my S5 so I can not say it works for all system.

I have flow sensor disabled but never tried to unplug it and print it. I will try. Thanks.

I did not try to print directly from Cura over wifi. Never done this before. I will try it.

This is the log file: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14.32-ultimaker (root@runner-ptzpiGvW-project-11447330-concurrent-0) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #3 SMP Tue Jan 21 13:06:10 UTC 2020 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Ultimaker UM3-XL (2621) [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 64 MiB at 0x7bc00000 [ 0.000000] On node 0 totalpages: 261894 [ 0.000000] free_area_init_node: node 0, pgdat b0a64800, node_mem_map eb300000 [ 0.000000] Normal zone: 2302 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 261894 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 16 pages/cpu @efea2000 s34956 r8192 d22388 u65536 [ 0.000000] pcpu-alloc: s34956 r8192 d22388 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259592 [ 0.000000] Kernel command line: um_an=235b console=tty0 fbcon=map:63 root=/dev/mmcblk1p2 ro rootwait rootdelay=2 rootfstype=f2fs console=ttyS0,115200 earlyprintk [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 961612K/1047576K available (5120K kernel code, 473K rwdata, 1604K rodata, 2048K init, 259K bss, 20428K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0000000 - 0xff800000 ( 248 MB) lowmem : 0xb0000000 - 0xeff06000 (1023 MB) pkmap : 0xafe00000 - 0xb0000000 ( 2 MB) modules : 0xaf000000 - 0xafe00000 ( 14 MB) .text : 0xb0008000 - 0xb0600000 (6112 kB) .init : 0xb0800000 - 0xb0a00000 (2048 kB) .data : 0xb0a00000 - 0xb0a76720 ( 474 kB) .bss : 0xb0a7d34c - 0xb0abe1d4 ( 260 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.008089] Switching to timer-based delay loop, resolution 41ns [ 0.014623] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.024129] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns [ 0.033807] Console: colour dummy device 80x30 [ 0.038744] console [tty0] enabled [ 0.042263] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.052723] pid_max: default: 32768 minimum: 301 [ 0.057596] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.064329] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.072282] CPU: Testing write buffer coherency: ok [ 0.077751] /cpus/cpu@0 missing clock-frequency property [ 0.083171] /cpus/cpu@1 missing clock-frequency property [ 0.088619] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.094827] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.101641] Hierarchical SRCU implementation. [ 0.108766] smp: Bringing up secondary CPUs ... [ 0.114271] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.114422] smp: Brought up 1 node, 2 CPUs [ 0.124408] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.130674] CPU: All CPU(s) started in HYP mode. [ 0.135390] CPU: Virtualization extensions available. [ 0.141621] devtmpfs: initialized [ 0.152856] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.161008] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.170963] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.179732] pinctrl core: initialized pinctrl subsystem [ 0.186368] NET: Registered protocol family 16 [ 0.192313] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.200366] cpuidle: using governor ladder [ 0.204594] cpuidle: using governor menu [ 0.208864] No ATAGs? [ 0.208958] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.219454] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.241561] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@1c00000/pinctrl@1c20800/ahci_pwr_pin@1, deferring probe [ 0.253622] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@1c00000/pinctrl@1c20800/usb0_vbus_pin@0, deferring probe [ 0.267705] SCSI subsystem initialized [ 0.271765] usbcore: registered new interface driver usbfs [ 0.277422] usbcore: registered new interface driver hub [ 0.282955] usbcore: registered new device driver usb [ 0.288410] pps_core: LinuxPPS API ver. 1 registered [ 0.293468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.302755] PTP clock support registered [ 0.307872] clocksource: Switched to clocksource arch_sys_counter [ 0.322629] NET: Registered protocol family 2 [ 0.327826] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.335161] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.341831] TCP: Hash tables configured (established 8192 bind 8192) [ 0.348437] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.354508] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.361236] NET: Registered protocol family 1 [ 0.869859] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 0.877410] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.887436] Initialise system trusted keyrings [ 0.892108] Key type blacklist registered [ 0.896516] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.909212] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.919135] Key type asymmetric registered [ 0.923467] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.930986] io scheduler noop registered [ 0.935271] io scheduler cfq registered (default) [ 0.940729] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@1c00000/pinctrl@1c20800/usb0_id_detect_pin@0, deferring probe [ 0.956742] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.022248] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.031593] console [ttyS0] disabled [ 1.055478] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 48, base_baud = 1500000) is a U6_16550A [ 1.064603] console [ttyS0] enabled [ 1.071677] bootconsole [earlycon0] disabled [ 1.101645] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 49, base_baud = 1500000) is a U6_16550A [ 1.131929] 1c29000.serial: ttyS2 at MMIO 0x1c29000 (irq = 50, base_baud = 1500000) is a U6_16550A [ 1.164098] 1c29400.serial: ttyS3 at MMIO 0x1c29400 (irq = 51, base_baud = 1500000) is a U6_16550A [ 1.181152] loop: module loaded [ 1.185434] libphy: Fixed MDIO Bus: probed [ 1.190360] sun7i-dwmac 1c50000.ethernet: PTP uses main clock [ 1.196135] sun7i-dwmac 1c50000.ethernet: no reset control found [ 1.202220] sun7i-dwmac 1c50000.ethernet: no regulator found [ 1.207964] sun7i-dwmac 1c50000.ethernet: Ring mode enabled [ 1.213547] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supported [ 1.220791] sun7i-dwmac 1c50000.ethernet: Normal descriptors [ 1.234789] libphy: stmmac: probed [ 1.238252] mdio_bus stmmac-0:00: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 1.247735] mdio_bus stmmac-0:01: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 1.258321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.264902] ehci-platform: EHCI generic platform driver [ 1.270640] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.276856] ohci-platform: OHCI generic platform driver [ 1.282559] usbcore: registered new interface driver usb-storage [ 1.289715] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 1.296522] sunxi-rtc 1c20d00.rtc: RTC enabled [ 1.301168] i2c /dev entries driver [ 1.305740] axp20x-i2c 0-0034: AXP20x variant AXP209 found [ 1.319034] ldo1: supplied by regulator-dummy [ 1.323747] ldo2: supplied by regulator-dummy [ 1.329268] ldo3: supplied by regulator-dummy [ 1.335026] ldo4: supplied by regulator-dummy [ 1.339486] vdd-io-pg: Bringing 3000000uV into 3300000-3300000uV [ 1.346019] ldo5: supplied by regulator-dummy [ 1.351500] dcdc2: supplied by regulator-dummy [ 1.356592] dcdc3: supplied by regulator-dummy [ 1.362555] axp20x-i2c 0-0034: AXP20X driver loaded [ 1.370751] sdhci: Secure Digital Host Controller Interface driver [ 1.376955] sdhci: Copyright(c) Pierre Ossman [ 1.382716] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.439216] sunxi-mmc 1c0f000.mmc: base:0xf0149000 irq:30 [ 1.445676] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq [ 1.508147] sunxi-mmc 1c11000.mmc: base:0xf014b000 irq:31 [ 1.513987] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.524097] ledtrig-cpu: registered to indicate activity on CPUs [ 1.531235] Registering SWP/SWPB emulation handler [ 1.536857] registered taskstats version 1 [ 1.541044] Loading compiled-in X.509 certificates [ 1.546997] Key type encrypted registered [ 1.561079] ehci-platform 1c14000.usb: EHCI Host Controller [ 1.566733] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 1.575243] ehci-platform 1c14000.usb: irq 33, io mem 0x01c14000 [ 1.607907] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.614325] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.621164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.628406] usb usb1: Product: EHCI Host Controller [ 1.633288] usb usb1: Manufacturer: Linux 4.14.32-ultimaker ehci_hcd [ 1.639658] usb usb1: SerialNumber: 1c14000.usb [ 1.644958] hub 1-0:1.0: USB hub found [ 1.648852] hub 1-0:1.0: 1 port detected [ 1.653721] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.659411] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.668299] ehci-platform 1c1c000.usb: irq 38, io mem 0x01c1c000 [ 1.678244] mmc1: new DDR MMC card at address 0001 [ 1.683710] mmcblk1: mmc1:0001 P1XXXX 3.60 GiB [ 1.688592] mmcblk1boot0: mmc1:0001 P1XXXX partition 1 16.0 MiB [ 1.694767] mmcblk1boot1: mmc1:0001 P1XXXX partition 2 16.0 MiB [ 1.700778] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.707959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.714777] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.722035] usb usb2: Product: EHCI Host Controller [ 1.726918] usb usb2: Manufacturer: Linux 4.14.32-ultimaker ehci_hcd [ 1.733289] usb usb2: SerialNumber: 1c1c000.usb [ 1.737908] mmcblk1: p1 p2 p3 [ 1.743202] hub 2-0:1.0: USB hub found [ 1.747032] hub 2-0:1.0: 1 port detected [ 1.751951] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.758703] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.766878] ohci-platform 1c14400.usb: irq 34, io mem 0x01c14400 [ 1.842078] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.848911] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.856136] usb usb3: Product: Generic Platform OHCI controller [ 1.862077] usb usb3: Manufacturer: Linux 4.14.32-ultimaker ohci_hcd [ 1.868445] usb usb3: SerialNumber: 1c14400.usb [ 1.874657] hub 3-0:1.0: USB hub found [ 1.878503] hub 3-0:1.0: 1 port detected [ 1.883329] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.890065] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.898132] ohci-platform 1c1c400.usb: irq 39, io mem 0x01c1c400 [ 1.972102] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.978929] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.986155] usb usb4: Product: Generic Platform OHCI controller [ 1.992096] usb usb4: Manufacturer: Linux 4.14.32-ultimaker ohci_hcd [ 1.998464] usb usb4: SerialNumber: 1c1c400.usb [ 2.003696] hub 4-0:1.0: USB hub found [ 2.007511] hub 4-0:1.0: 1 port detected [ 2.012396] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 2.023760] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 2.029579] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 2.037659] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.044490] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.051741] usb usb5: Product: MUSB HDRC host driver [ 2.056710] usb usb5: Manufacturer: Linux 4.14.32-ultimaker musb-hcd [ 2.063078] usb usb5: SerialNumber: musb-hdrc.1.auto [ 2.068702] hub 5-0:1.0: USB hub found [ 2.072518] hub 5-0:1.0: 1 port detected [ 2.077108] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:08 UTC (8) [ 2.085558] vcc3v0: disabling [ 2.088596] vcc5v0: disabling [ 2.091587] ahci-5v: disabling [ 2.097489] Freeing unused kernel memory: 2048K [ 4.300181] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 4.310611] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 4.320996] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 4.328914] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon]) [ 4.338585] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 4.346453] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon]) [ 4.467888] rc_core: IR keymap rc-cec not found [ 4.472450] Registered IR keymap rc-empty [ 4.476612] rc rc0: RC for sun4i as /devices/platform/soc@1c00000/1c16000.hdmi/rc/rc0 [ 4.484672] input: RC for sun4i as /devices/platform/soc@1c00000/1c16000.hdmi/rc/rc0/input0 [ 4.493384] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_ops [sun4i_drm_hdmi]) [ 4.502062] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.508703] [drm] No driver support for vblank timestamp query. [ 4.565267] sun4i-drm display-engine: fb0: frame buffer device [ 4.608326] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 4.687747] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x2000) [ 4.696325] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 1th superblock [ 4.704460] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x2005) [ 4.711982] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 2th superblock [ 4.719729] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x2000) [ 4.727218] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 1th superblock [ 4.734892] F2FS-fs (mmcblk1p1): Magic Mismatch, valid(0xf2f52010) - read(0x2005) [ 4.742393] F2FS-fs (mmcblk1p1): Can't find valid F2FS filesystem in 2th superblock [ 4.824518] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 5.049272] F2FS-fs (mmcblk1p2): Mounted with checkpoint version = 14de4 [ 5.304918] F2FS-fs (mmcblk1p3): Mounted with checkpoint version = 485d5e38 [ 5.871957] systemd[1]: System time before build time, advancing clock. [ 5.902046] systemd[1]: Failed to find module 'autofs4' [ 5.931162] NET: Registered protocol family 10 [ 6.200195] Segment Routing with IPv6 [ 6.213142] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.236189] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.258684] systemd[1]: Detected architecture arm. [ 6.309195] systemd[1]: Set hostname to <ultimakersystem-ccbdd300b763>. [ 6.668632] systemd-fstab-generator[129]: Checking was requested for "rootfs", but it is not a device. [ 6.754666] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 6.771815] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 7.108716] systemd[1]: griffin.system.service: Service has a D-Bus service name specified, but is not of type dbus. Ignoring. [ 7.141705] systemd[1]: griffin.printer.service: Service has a D-Bus service name specified, but is not of type dbus. Ignoring. [ 7.215331] systemd[1]: charon.service: Service has a D-Bus service name specified, but is not of type dbus. Ignoring. [ 7.275022] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 7.284934] systemd[1]: Listening on udev Control Socket. [ 7.896042] rfkill_gpio usb0-kill: usb0-kill device registered. [ 7.920005] rfkill_gpio usb1-kill: usb1-kill device registered. [ 7.930699] rfkill_gpio usb2-kill: usb2-kill device registered. [ 8.408081] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 8.558069] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 8.639124] systemd-journald[147]: Received request to flush runtime journal from PID 1 [ 8.661864] systemd-journald[147]: File /var/log/journal/afdbb9483672e59ab7707abe600ea16d/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 8.698254] usb 1-1: New USB device found, idVendor=28c7, idProduct=3841 [ 8.705047] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.712439] usb 1-1: Product: USB 2.0 Camera [ 8.716755] usb 1-1: Manufacturer: Ultimaker B.V. [ 8.779005] usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271 [ 8.785780] usb 2-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 [ 8.793302] usb 2-1: Product: WLAN [ 8.796859] usb 2-1: Manufacturer: MVQ1812 [ 8.801048] usb 2-1: SerialNumber: 12345 [ 10.050156] media: Linux media interface: v0.10 [ 10.091272] Linux video capture interface: v2.00 [ 10.125117] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (28c7:3841) [ 10.136016] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized! [ 10.146919] uvcvideo 1-1:1.0: Entity type for entity Extension 6 was not initialized! [ 10.159239] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized! [ 10.170326] input: USB 2.0 Camera: USB 2.0 Camera as /devices/platform/soc@1c00000/1c14000.usb/usb1/1-1/1-1:1.0/input/input1 [ 10.182941] usbcore: registered new interface driver uvcvideo [ 10.188837] USB Video Class driver (1.1.1) [ 11.138263] usb 5-1: new high-speed USB device number 2 using musb-hdrc [ 11.641835] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.929159] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 12.019455] usb 5-1: New USB device found, idVendor=18a5, idProduct=0251 [ 12.026200] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 12.033569] usb 5-1: Product: STORE N GO [ 12.037525] usb 5-1: Manufacturer: Verbatim [ 12.041915] usb 5-1: SerialNumber: 07019A1D1824C314 [ 12.098838] usb-storage 5-1:1.0: USB Mass Storage device detected [ 12.144144] scsi host0: usb-storage 5-1:1.0 [ 12.183651] libata version 3.00 loaded. [ 12.448676] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 12.456214] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 12.468239] Generic PHY stmmac-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 12.518073] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled [ 12.525436] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available [ 12.533273] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW [ 12.588026] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.590799] pca953x 3-0024: 3-0024 supply vcc not found, using dummy regulator [ 12.614546] usb 2-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested [ 12.699992] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 12.709761] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 12.921091] usb 2-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008 [ 13.013733] usbcore: registered new interface driver ath9k_htc [ 13.174887] ath9k_htc 2-1:1.0: ath9k_htc: HTC initialized with 33 credits [ 13.418192] scsi host1: ahci-sunxi [ 13.495069] ath9k_htc 2-1:1.0: ath9k_htc: FW Version: 1.4 [ 13.500809] ath9k_htc 2-1:1.0: FW RMW support: On [ 13.504622] edt_ft5x06 3-0038: no IRQ setup, using polled input [ 13.505198] input: generic ft5x06 (79) as /devices/platform/soc@1c00000/1c16500.i2c/i2c-3/3-0038/input/input2 [ 13.521629] ath: EEPROM regdomain: 0x60 [ 13.521635] ath: EEPROM indicates we should expect a direct regpair map [ 13.521645] ath: Country alpha2 being used: 00 [ 13.521649] ath: Regpair used: 0x60 [ 13.600619] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 37 [ 13.888859] ieee80211 phy0: Atheros AR9271 Rev:1 [ 13.952745] ata1: SATA link down (SStatus 0 SControl 300) [ 13.975448] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1) [ 14.281140] f2fs_msg: 2 callbacks suppressed [ 14.281155] F2FS-fs (mmcblk1p3): Mounted with checkpoint version = 485d5e3a [ 14.757488] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 14.778269] input: axp20x-pek as /devices/platform/soc@1c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input3 [ 14.870473] axp20x-gpio axp20x-gpio: AXP209 GPIO driver loaded [ 14.978366] at24 1-0050: 2048 byte 24c16 EEPROM, writable, 16 bytes/write [ 15.053949] scsi 0:0:0:0: Direct-Access Verbatim STORE N GO PMAP PQ: 0 ANSI: 6 [ 15.073061] sd 0:0:0:0: [sda] 31318016 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 15.093777] sd 0:0:0:0: [sda] Write Protect is off [ 15.098683] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 15.114737] sd 0:0:0:0: [sda] No Caching mode page found [ 15.120200] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 15.149078] sda: sda1 [ 15.162393] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 15.175706] systemd-journald[147]: File /var/log/journal/afdbb9483672e59ab7707abe600ea16d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 19.522726] usbcore: registered new interface driver uas [ 19.779452] ath9k_htc 2-1:1.0 wlx000e8e8f2428: renamed from wlan0 [ 33.645097] i2c i2c-3: new_device: Instantiated device lm75b at 0x4f [ 33.793775] lm75: probe of 3-004f failed with error -5 [ 34.597135] Netfilter messages via NETLINK v0.30. [ 34.677053] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net> [ 44.059978] random: crng init done

From first looks it seems to me just looking at the end product that in your CURA settings the S5 has higher height of layers. Have you checked the CURA settings? - to see if they are the same. S3 looks fine and S5 looks draft quality.

Depending your work environment temp and humanity levels can affect the figment. If it gets too soft sometimes the feeder can not grip it enough. To test the proper way, remove the figment and just check if you have lots of wear at the point just after you feed the figment into the UM. What happens is the figment gets too soft and the feeder can not grip it and it just wears it out at that point. The printer thinks its still feeding through. To fix this in future you can remove about 3 cm at the end of the current figment, that would make the part that was worn a little past the point of part of the UM that feeds it. Then adjust the tension for it to feed better. Depending on your environment you might have to make it less hard or more easy for it to proper grip. I am talking at the back where you feed the figment into the UM there should be a bolt to adjust and a level meter to see. depending on you UM. I have S2 and S5 and they both have this.

Someone please help.... I am desperate ... I have this error message: An unspecified error has occurred in the motion controller. Restored to default settings. This message appears just before its started to print. So after the bed levelling and pre warmup. What I have done so far, not in order and maybe I missed a few things: restored to default settings reset to factory settings calibrated lift switch downgraded firm where from 5.8.2 to 5.8.1 upgraded to 6.1.0 contacted ultimate distributor. was told to clean it. cleaned it again. still same problem 1 week passed sent it to Distributor they said the removed some plastic from the shaft and it worked. sent it back to me and had same error 2 weeks passed resisted throwing out the winder for 2nd time. Then I thought it could be my USB stick. and formatted it. used different USB stick installed Cura 4.8.0 installed Cura 4.5 tried again on 4.6 resisted throwing out the window for 5th time. tried basic settings on Cura tried default settings on Cura Ask the Distributor to send the file they printed. They sent me a file I sent them that they configured in Cura, I downloaded it and printed it directly. I used their file in my Cura and exported it to USB Thinking I will enjoy burning it now.... But its snowing outside... really worried about my S2... its getting twice the load.... my first child is going strong without a single hiccup.. 😄 I will give a 200 euro reward to anyone that works out the problem. I will send via paypal.