UltiMaker uses functional, analytical and tracking cookies. Tracking cookies enhance your experience on our website and may also collect your personal data outside of Ultimaker websites. If you agree with the use of tracking cookies, click “I agree, continue browsing”. You can withdraw your consent at any time. If you do not consent with the use of tracking cookies, click “Refuse”. You can find more information about cookies on our Privacy and Cookie Policy page.
you can slow acceleration under the motion settings on the printer, this can help. I have mine set to 1200
you can also adjust jerk if needed.
when printing slow adjust the nozzle temp as low as possible to help improve the quality. at 30mm/s I print at 190deg nozzle and 50deg bed at 0.1 layer height.
Not sure about your adhesion problem though. A thin layer of glue should be fine for that print but printing on painters tape helps with things like the toes if you don't want brim.
Here are a couple of my frogs that were printed quite slow
In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
Recommended Posts
Labern 775
you can slow acceleration under the motion settings on the printer, this can help. I have mine set to 1200
you can also adjust jerk if needed.
when printing slow adjust the nozzle temp as low as possible to help improve the quality. at 30mm/s I print at 190deg nozzle and 50deg bed at 0.1 layer height.
Not sure about your adhesion problem though. A thin layer of glue should be fine for that print but printing on painters tape helps with things like the toes if you don't want brim.
Here are a couple of my frogs that were printed quite slow
Link to post
Share on other sites
g_leopard 2
those prints are really really impresive!!!! im doing that right now
Link to post
Share on other sites
SandervG 1,521
If you want tips on how to print small, @labern is your guy!
Link to post
Share on other sites