Jump to content

UM2 Back Axle Remains Flush?


sg7019

Recommended Posts

Posted · UM2 Back Axle Remains Flush?

A quick question, does the back axle of your UM2 remain flush with the housing or move to one side? I have a new machine and it started off flush but is now protruding. The front axle remains flush. looking at the online assembly guide it seems there is no spacer on the left hand side so some movement is likely. Is it expected to move and find a natural 'home' position or is there something wrong? The machine appears to be printing OK (apart from under extrusion but that is under investigation) but I have some concerns about the assembly of this printer and I'm wondering if this is normal.

cheers,

Steve

backaxle.thumb.jpg.164288eb1a4a56915e1c82aa0a60dd9e.jpg

backaxle.thumb.jpg.164288eb1a4a56915e1c82aa0a60dd9e.jpg

  • Link to post
    Share on other sites

    Posted · UM2 Back Axle Remains Flush?

    Unfortunately this has been a bit of an issue lately, I've seen quite a few machines with this problem. The fix is easy enough though, push the rod back into place, make sure the belt pulleys are pushed as far as they can go towards the wall of the machine (you might have to loosen the set screw further to be able to move it) and then re-tighten the screw, hard.

    Make sure you check all of the pulleys while you're at it.

  • Link to post
    Share on other sites

    Posted · UM2 Back Axle Remains Flush?

    Thanks for the info, it didn't seem right.

    I've looked at the assembly guide on github and as there is no spacer on the side of the double pulley I guess it does have to be pushed to the side, but there is no info on how close it should be to the bearing. I've built a Printrbot and maintained a couple of others but there is info available for those and the github manual for the UM2 is not very detailed, I don't want to damage such an investment or worse have it perform under par. Right now I'm very new to this machine, I don't even know how to get the head out of the home position so I can get access to that corner.

    I've had a feeder build issue, a cracked printhead on delivery, this axle problem and in the background a significant under-extrusion issue (stepper skipping on all but the simplest of prints). I've seen great quality out of some prints I've made, surpassing my other machines, but I wonder what is next. I know better than to expect trouble free operation but I did hope that for the price the machine could at least be assembled well.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...