best way to remove prints from glass without damage

[kerberg 0]

What is the best method to remove a print from the glass without damaging the pla? Any special methods? I think i saw online that someone used canned air to rapidly cool the glass? anyone ever try that? I dont ant to crack my glass thats for sure? Thanks ! E

[SandervG 1,521]

Hi @Kerberg, I moved your topic where I think it is more appropriate.

Usually if you just let it cool down it comes off pretty easy.

Alternatively, you could keep it under cold water. I never tried canned air.

It is hardened glass so it won't crack that easily, but if you wait for just a few minutes you should be able to just take it off.

[neotko 1,417]

For fast prints I bought a second glass from ultimaker. So I just swap it recalibrate and print while the glass cools naturally.

[eldrick 65]

After it cools to room temp, if the print doesn't come loose easily, put the build-plate in the freezer for 15 minutes, and the piece should pop right off.

[kerberg 0]

thanks for the replies!