Jump to content

UM2 Frame .dxf Files


neptuna

Recommended Posts

Posted (edited) · UM2 Frame .dxf Files

Hi guys,

I am new to ultimaker community and also to 3D printing. I am planning to build UM as my first 3D printer. I first look at UMO+ then I decided to build UM2.

I order the materials and in the meantime I was planning to build the frame but I could not find the .dxf files. I have been searching for them for almost 3-weeks but no luck. There are step files in GitHub but I cannot convert them, I tried Freecad but again no luck.

I found the .dxf files for UMO+ and UM2 extended but I could not find for UM2. So what I am asking is, if anyone has dxf files could share it. I am planning to build it with aluminum and plexiglass using CNC.

Thank you for your help in advance.

Edited by Guest
  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    I have not seen them also. But I would advise you to just build the extended as it won't cost much more to make. Most things are the same and you have the added benefit of having an extended.

  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    I have not seen them also. But I would advise you to just build the extended as it won't cost much more to make. Most things are the same and you have the added benefit of having an extended.

     

    I consider that also but people say UM2 is better than UM2 extended. What do you think about that?

  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    I'm sure the dxf files are also on github.... and you can create dxf files from the step files using free fusion360

     

    Thank you but I could not manage it to work on my mac, I tried Freecad but that one did not save files in .dxf format now I am going to try Onshape.

  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    I have both and I would get the extended. It does get a little bit of vibration lines on tall parts but small items that you would normally print on the UM2 are the same, for the flexibility it's worth it to have the extended.

    The UM2go has the best quality and is my most used printer.

    • Like 1
    Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    UM2 panels are milled. DXF files usually don't work for milling, you need a STEP or IGES file for that.

    DXF files for the UM original are here link

    • Like 1
    Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    I use dxf files in cambam, for my shapeoko cnc.... you obviously have to set the different 'actions' on the different parts in the dxf.

    • Like 1
    Link to post
    Share on other sites

    Posted (edited) · UM2 Frame .dxf Files

    Thank you guys. I think I am going to buy the frame :) What do you think about the wood frames on aliexpress?

    Edited by Guest
  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    Good luck!!

    • Like 2
    Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    My experience with a wood frame was horrible. You want quality buy to a ultimaker distributor. I think everything except the sidepanels can be ordered (mail to your closest distributors). Also in my experience the price it's pretty much alike.

    • Like 1
    Link to post
    Share on other sites

    Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    The original DXF files are in the same location as the panel pdf/step files, for example;

    https://github.com/Ultimaker/Ultimaker2Extended/tree/master/2211

    look in the BOM to see the folder/part numbers for the panels.

    • Like 1
    Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    That's the extended not standard um2

  • Link to post
    Share on other sites

    Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    Im sorry. I highlight the subject, but the links are dead. Does anyone have a um2 ( I mean this printer ) frame for laser cutting nor for cnc. Thank you for everyone 🙂 

  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    Does anyone have it 😕 

  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    Ultimaker 2 frame panels are designed to be milled, not laser cut.

    3D-step files can be found on the Github page.

  • Link to post
    Share on other sites

    Posted · UM2 Frame .dxf Files

    you can adjust the UM2 files for laser or CNC, i've done it for a custom CNC'ed  UM2GOext. for an UM2 its probably easier just to take the UMoriginal frame files and make the adjustments you want/need

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...