Technical data sheet Ultimaker 2

[paul9 20]

Hello everyone..

Who can help me find the complete technical manual of Ultimaker 2 I need to know what kind of straps they used because I would like to replace them with old ones and buy new ones.

[stu_le_brew 42]

this link may help manuals

[paul9 20]

this link may help manuals

 

No simply manual, construction manual.

[Dim3nsioneer 557]

 

Here you find the assembly manual as part of the source files.

Edited July 26, 2017 by Guest

[paul9 20]

Here you find the assembly manual as part of the source files.

Thanks It was what I was looking for.

[paul9 20]

Do you think I can buy new straps for my Ultimaker 2?

[Dim3nsioneer 557]

You mean the belts? Sure. Please contact your Ultimaker reseller. He should be able to get them for you if he does not have it on stock.

[paul9 20]

Yes the belts!

[paul9 20]

Last year I decided to convert my ultimaker 2 into version 2+.

Before the conversion I saw that 3D Solex offered the possibility of converting it also for 1.75mm filaments and then I decided to buy the Olsson extrusion kit for 1.75mm filaments then I also bought from Bondtech the filament feeder for 1 , 75mm and since I converted the machine I have overextruder problems, I had to reduce the flow from 100% to 65% with 0.6mm and 70% nozzle with 0.4mm nozzle but despite all I can not make perfect prints like It was first with filaments of 2.85mm.

What can depend on this problem of having too much material flow?

[Dim3nsioneer 557]

uhmm... would you mind posting rather different topics in different threads? People who come later with maybe the same question find the answer much easier if you separate the topics.

[paul9 20]

uhmm... would you mind posting rather different topics in different threads? People who come later with maybe the same question find the answer much easier if you separate the topics.

ok