Jump to content

Create black PLA earrings and paint with gold paint - anyone tried this on PLA?


nzo

Recommended Posts

Posted · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

I've no illusions that whatever I choose, the "gold" will look fake. So far I've been looking at gold-leaf, gold Atelier spray paint or just brushing on gold paint (acrylic?).

Any tips on how to get a good post-print gold finish?

  • Link to post
    Share on other sites

    Posted (edited) · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    You need some primer first, to smooth out layers and make the paint stick.

    I have previously had good results using first some spray-filler (for repair work etc.) to smooth out the print... The stoff layers into cracks nicely and sands well.. Then apply a black shiny primer before the gold finish

    Edited by Guest
    • Like 1
    Link to post
    Share on other sites

    Posted · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    Hi tommyph1208...

    Your help much appreciated - thank you! I was planning on printing with black PLA but I'm guessing whatever filament color I use, applying some spray-filler will give me a smoother overall result once the shiny primer and gold layers are added. By using a black filament, will I still require the black shiny primer?

    Do you recommend any particular brand of spray for the filler and black shiny primer? I'm pretty clueless to model painting :)

  • Link to post
    Share on other sites

    Posted (edited) · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    Hi tommyph1208...

    Your help much appreciated - thank you! I was planning on printing with black PLA but I'm guessing whatever filament color I use, applying some spray-filler will give me a smoother overall result once the shiny primer and gold layers are added. By using a black filament, will I still require the black shiny primer?

    Do you recommend any particular brand of spray for the filler and black shiny primer? I'm pretty clueless to model painting :)

     

    The filler i used was light brown/sand colored, so yes you would have to apply a black shiny primer on top before adding the gold... The black before the gold is something I picked up on Adam Savages (former Mythbusters host) youtube page. He is very into cosplay, props etc. and does these one-day builds of everything from workshop machines and items to cosplay armors, weapons and gadgets.

    I don't remember the brand of spray filler I used, but its doubtful you would be able to find the same type anyways, since I live in Denmark and you are from New Zealand... It doesn't get much further apart than that :)

    I would visit an auto-parts store and ask for it, see what they have... It looks and sprays like one of those spray-color cans, but is somewhat thicker. The one I used was intended for cars and similar to fill out dents etc. after eg. sanding away rust and before applying paint and varnish.

    Edited by Guest
    • Like 1
    Link to post
    Share on other sites

    Posted · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    Huge thanks tommyph1208. Went shopping for spray and brush-on paints today and found a nice rich gold as well as some black and white gesso. Next I'll dig out my airbrush and give it a good once-over clean.

    Cheers my friend.

  • Link to post
    Share on other sites

    Posted · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    Just out of curiosity: I always thought that you needed a primer color that was identical or very close to the final color, so that defects or scratches would be almost invisible. Then why would you use black as background for gold? Or does that give any special effect? Similar to the "red wine metallic on gold" that is sometimes used in special car paintings for a deeper gloss in the red metallic?

  • Link to post
    Share on other sites

    Posted · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    Just out of curiosity: I always thought that you needed a primer color that was identical or very close to the final color, so that defects or scratches would be almost invisible. Then why would you use black as background for gold? Or does that give any special effect? Similar to the "red wine metallic on gold" that is sometimes used in special car paintings for a deeper gloss in the red metallic?

    I have never had an issue with primers having radically different colours from final colours. If you layer your paints properly, you can get a thin, opaque colour cover. I have always treated primer colours as something that should expose flaws based on the colour of the substrate it is covering. Grey primer does not really show up as coverage on grey plastics. Neither does white. But black can be sanded and you can readily see where things even out or you start to sand into the plastic and not just evening out the surface.

    For doing things like the black backing is for using thin layers that start out very transparent and build to the opacity you desire. This allows the light to pass through and make for richer colours on many cases. Say a black background base with a red on top can go from a very deep cherry colour to a vibrant, bright scarlet red.

    It also lends towards a 'deeper' look as you described.

    • Like 1
    Link to post
    Share on other sites

    Posted · Create black PLA earrings and paint with gold paint - anyone tried this on PLA?

    Just out of curiosity: I always thought that you needed a primer color that was identical or very close to the final color, so that defects or scratches would be almost invisible. Then why would you use black as background for gold? Or does that give any special effect? Similar to the "red wine metallic on gold" that is sometimes used in special car paintings for a deeper gloss in the red metallic?

    Yeah, the exact "science" behind it I don't know, but as mentioned above, it was something I picked up from Adam Savages (former Mythbusters) youtube channel... He is very into cosplay, props, model making etc. and amongst others do these "one day builds"... I got this from an episode where he did a prop rifle with some metallic effects on it.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...