Since Cura update build plate only being applied to half the print model?

[rickmjohnston 0]

Hi.

Not sure what this is related to but since Cura 3.1 update and firmware on my UM3 the build plate adhesion layer is only applying to 1/2 the model? This didnt happen before and as a result the layer even with glue applied lifts from bed. I've tried more glue on the area w/o the build plate and still no help keeping portion of the model to the bed.

Any thoughts on what may be happening here and what to check? I can determine where the build plate will be applied but how to create build plate around entire model base?

TIA!

Cheers!

Rick...