Regular/Maximum Fan Speed Threshold

[Asterid 1100 0]

When I load any STL model, I get the error message shown below: "Unable to Slice with the current settings.  The following settings have errors: Regular/Maximum Fan Speed Threshold".

 

This occurs with the "recommended" settings as well as my custom settings.

Cura-3.1.0.AppImage

OpenSUSE Leap 42.2

[gr5 2,189]

Interesting.  I would try displaying all settings related to "fan" (you can search through the settings and type "fan" in the search term) and see if that makes the problem more obvious.

[Asterid 1100 0]

gr5,

I have tried already tried a variety of settings, but no luck.  Can you suggest a trial set of settings related to fan?

 

I need to clarify:  Cura slices fine with the provided profiles (that are not compatible with my printer).  I found a similar bug report on Cura 2.4 at https://github.com/Ultimaker/Cura/issues/1417

In that case, the error identified was not the actual error.  I tried the "fix" to that bug, which was to export and then import the profile, but that didn't help in my case.

I might also mention that these models all work fine with 14.12 ( my Cura version before trying 3.1).

[kmanstudios 1,120]

What is your printer?

[Asterid 1100 0]

It is a Plastic Scribbler Asterid 1100, a REPRAP type.  What would that have to do with the slicing?  It works great with Cura 14.12.

[Asterid 1100 0]

I think the problem may be the profile that uses the Tweakatz Plugin.  I imported it from 14.12.

 

Anyway, I've installed 15.04 and will stay with that.  3.1 seems too buggy, and I hate the new GUI interface.

 

Thanks to all who commented