Jump to content

Mark2 Calibration

Nobima
 Share

Recommended Posts

Nobima

Nobima 1

Posted
Posted · Mark2 Calibration

Hello,

installing new Mark2 is finished. It seems all  is working properly. Unfortunately printing the calibration-gcode (xy_calibration.V03.gcode), Extruder 1 works fine, Extruder 2 does not deliver filament, because its feeder does not rotate. Moving filament with extruder 2 on the display, filament is delivered as expected. Using a 24V - 400W power supply does not help. What can be the reason ?

    • Link to post
    Share on other sites
    tinkergnome

    tinkergnome 927

    Posted
    Posted · Mark2 Calibration

    If i remember right, you have to choose a material for the second extruder first (on the printer: Material Settings -> Extruder 2).

    Without a known material there is no known temperature and the "cold extrusion prevention" kicks in.

    • Like 2
    Link to post
    Share on other sites
    foehnsturm

    foehnsturm 969

    Posted
    Posted · Mark2 Calibration
    33 minutes ago, tinkergnome said:

    If i remember right, you have to choose a material for the second extruder first (on the printer: Material Settings -> Extruder 2).

    Without a known material there is no known temperature and the "cold extrusion prevention" kicks in.

    :+1: No way that I would have remembered such a thing ...

     

    • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
     Share
    Followers 0
    Go to topic listing

    • Our picks

      • UltiMaker Cura 5.7 stable released

        UltiMaker Cura 5.7 stable released

        ArunC posted a topic in UltiMaker Cura,

        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 18 replies
        MariMakes

        Picked By

        MariMakes,

      • Release Notes: S-Line Firmware 8.3.0 (Latest)

        Dustin posted a topic in Firmware,

        S-Line Firmware 8.3.0 was released Nov. 20th on the "Latest" firmware branch.
        (Sorry, was out of office when this released)

        This update is for...
        All UltiMaker S series  
        New features
         
        Temperature status. During print preparation, the temperatures of the print cores and build plate will be shown on the display. This gives a better indication of the progress and remaining wait time. Save log files in paused state. It is now possible to save the printer's log files to USB if the currently active print job is paused. Previously, the Dump logs to USB option was only enabled if the printer was in idle state. Confirm print removal via Digital Factory. If the printer is connected to the Digital Factory, it is now possible to confirm the removal of a previous print job via the Digital Factory interface. This is useful in situations where the build plate is clear, but the operator forgot to select Confirm removal on the printer’s display. Visit this page for more information about this feature.
          • Like
        • 0 replies
        MariMakes

        Picked By

        MariMakes,
      View All
    ×
    ×
    • Create New...