Fillament for hot environment

[SMHRambo 0]

Hi,

i'am looking for a filament, that is capable for replacement parts in my 3d printer.

It is a Ultimaker 2(+) with a enclosure, so pla is melting if i am printing with abs.

 

In the future, I would also like to use material that requires even higher temperatures.

 

Any idea what material is best for my needs.

 

Thanks in advance

[Truc_fdm 0]

Check for the Ultimaker CPE+

[tinkergnome 927]

There are several filaments nowadays that can withstand 100°C and more, what are the mechanical requirements?

Some possibilities that are easy to get in Europe:

 

• ColorFabb HT
• FormFutura Volcano PLA
• Extrudr Green-Tec
• bioFila plaTec

 

take your choice...

[Bossler 8]

Let me add BioFila PowR.

It's some sort of PLA-derivative but the maker claims it's good for up to 130°C...

 

Do not know whether that's really realistic with this stuff, but at least I made a test in boiling water -

and there was no sign of softening or weakness of this stuff!

Gives quite descent surface quality as well.

 

Unfortunately they have only a few colors available yet.

[SMHRambo 0]

Thanks alot for the advice.

 

Here are a few parts I made for my printer.

1. Ultimaker2 Cable Chain by IRobertI from YouMagine

2. Dual Head Ultimaker2 by UltiArjan from YouMagine

Both didn't like printing with ABS in a enclosure.

The dual head holes were worn out.

The cable chain was twisted and deformed.

 

The next time I print these parts,

I want them to handle higher temperatures.

[Bossler 8]

SMH - you may missed to include the pictures;-)

[SMHRambo 0]

You mean pictures from the bent parts?
I have to see, if I still have them.

ButI think, I threw it away.