Jump to content

Ultimaker Marlin Build Configuration.h for UMO


bob

Recommended Posts

Posted · Ultimaker Marlin Build Configuration.h for UMO

I am trying to add WiFi to an Ultimaker (Original) via Serial 3 on the Ultimaker 1.5.7 pcb. I measured the Rx/Tx pins on an oscilloscope an neither peeped.  I have read that I need to enable this in Marlin via 

#define SERIAL_PORT 3 // this is normally set to 0
#define BTENABLED // enable this 

now the issue that I am having is all three of the marlin builder websites that I know of are not working. (Daid's, Ginge's and Amadee's) and I am looking for a Configuration.h that is setup for the ultimaker original as defined by the defaults of one of the builders. Anyone know where I can find that? (of course a solution to my issue that does not require rebuilding marlin would be just as good.)

 

Also, I am sad to see that The tags don't contain "UMO".

  • Link to post
    Share on other sites

    Posted (edited) · Ultimaker Marlin Build Configuration.h for UMO

    I am fairly certain I would have to anyway, as I dont remember any of the Builders to have an option for Serial_Port, My dilemma is where can I find the default settings for the UMO. As my latest searches have pointed me to the Ultimaker Marlin Branch in GITHub, which seems to contain the required Config file, my current question is, weather I should use the Ultimaker build or the latest Marlin build... The UltimakerMarlin branch does not seem to be very current, And I am unsure if the branch was made purely for the Configuration.h or if other files were modified as well...

    Edited by bob
  • Link to post
    Share on other sites

    Posted · Ultimaker Marlin Build Configuration.h for UMO

    It depends on what you want.

    Do you want an guranteed working Marlin for UMO take the version of Ultimaker.

    If you don't mind some testing and trial and Error the mainline marlin can be made to work on the UMO.

     

    I'd probably just try to merge the changes UM made to the config.h into the marlin mainline's version and build and see if it works first.

  • Link to post
    Share on other sites

    Posted (edited) · Ultimaker Marlin Build Configuration.h for UMO

    Amadee's builder seems to be working again. It is the last Firmware I used after I completed my Heated bed, It seems to be a branch from the Ultimaker branch, So I think I will use the configurator to build the configuration.h and then download the branch and build it manually.

    Edited by bob
  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
        • 26 replies
    ×
    ×
    • Create New...