Cura 3.3.1 does not start, win 10

[kaiborg 1]

Hello,

 

I have just installed Cura on a Lenovo T430 laptop and tried to start it. However, after the splashscreen and displaying the disclaimer, cura.exe stops to work, Windows closes the program.

I have added my stderr file.

I have not done any changes and also tried to re-start with deleted cura folder in my local folder.

stderr.log

Kai.

[nallath 1,123]

Odd. I don't see anything weird in the logs (or anything that would explain any form of crash)

[kaiborg 1]

Is there any way for a debug start or some other way of investigating this problem?

 

Kai.

[kaiborg 1]

I went back with previous releases. The version 2.31 64 is the last one that worked on my PC. Did anything happen from 2.31 to 2.4?

 

Kai.

[FelixMagnetix 0]

I still expiring the same Problem. The previews Version did start but did not found my Printer and 3.3.1. does not start even.

Tried to start it as a Admin and other stuff, no way to open it on windows 10 x64. Feel mad i am bound to Repetier Host since many month, because i expire bugs any time in a new Version. Feeling a bit mad about, because i was realy interested to test the Ironing function with a Flat Head Sapphire Prototype Noozle...

[kaiborg 1]

Hello,

 

my issue was solved by upgrading the graphics drivers. Since 2.3.1 Cura is using a newer version of open-GL. If oyur problems started with later versions, that might not be the solution.

I do not contact the printer from Cura, I use an octopi for that.

 

Kaiborg