Random cylinder on build plate, cannot select

[Bcow 1]

Adding objects to a project in Cura, I notice a circular "shadow" in the corner. The object only becomes visible in X-ray view, it is a cylinder of mixed primary/support material. I have no idea how it got there or why it is there. I cleared the plate and started over. It's still there. I can't select it or delete it. If I turn off Support material, it goes away. It appears as soon as I bring a model onto the build plate, disappears when I clear the plate. I tried updating/restarting Cura, it's still there.

 

Any ideas what the heck this thing is and how to get rid of it? Screenshot below. Using Cura 3.4.1

[Bcow 1]

Well, I tinkered through the software long enough to figure it out. It's the "prime tower" in Custom Settings. It must be a new feature, I have no idea why it is so opaque and enabled by default with no information on mouseover or at least selectable, but whatever, now I know. Hopefully other people with the same issue will find this and it could help them.

 

Edited for politeness

Edited July 13, 2018 by Bcow
too much snark in original comment

[gr5 2,230]

Sorry!  We need more moderators in my opinion.

 

[Bcow 1]

Hey gr5! Aww now I feel like a prick. Sorry for the snark. Impatience got the best of me. I'll go back and edit my reply to focus on the solution. Thanks!

[kmanstudios 1,120]

I have been on the board four times or more times in the last 24 hours and did not see this myself. A lot of people find this issue that you posted about and is usually answered by @gr5, me or someone else. I do not know why I did not see this. But, given that at this time the post is only 19 hours old, please consider that (A) it can be missed and a quiet 'bump' up the ladder is helpful (B) good for you! You figured it out and posted a solution....always most helpful :) and finally, (C) you will not find a more responsive forum than this one. We do like to help.....we just do not always see everything and @gr5 is always on top of things and frankly, he is allowed to miss a few things. That guy is all over the questions with great tips and solid info! :)

 

Super glad you figured it out. :)

 

And, welcome to the forum :) and look forward to the cool stuff you will be making!

[Bcow 1]

Hi kmanstudios,

 

Agree absolutely. I was frustrated with the software doing something so inexplicable, and surprised that there wasn't an explanation easily found. I apologized to gr5, I can only imagine how much thankless work goes into moderating here. Thanks for your comment!