Ultimaker 3 Strange text on display while printing

[solidite 0]

Hey Everyone, 

 

I've noticed something strange on my UM 3 since the latest firmware upgrade, 

it just comes up with "Printing... ch@ 5.1" when its printing

 

Anyone know what this is and how to get the print progress back?

 

thanks, 

Adam

[gr5 2,196]

Most likely there is a line in the gcode doing this.  An M117:

https://reprap.org/wiki/G-code#M117:_Display_Message

 

Search the gcode for any M117 and remove it.

 

[solidite 0]

The prints have been sliced and sent directly from Cura (3.4.1) so not really a chance to check the g-code

 

I did have some post-processing scripts in there but they were from a previous temp tower nothing sending specific text,

I've cleared them out will check on the next print if it made a difference

 

Thanks

[Dim3nsioneer 557]

Or it is printing in Dolby Digital... ?

 

I think @gr5 got it.

[solidite 0]

well, it did sound a little different, definitely Dolby ?

 

thanks guys, removing those scripts sorted it out, just started a print and all looks good