Everything is fine but it doesn't work.
fbrc8-erin 279
If it's not working, then something is wrong. Like @Smithy said, it looks like your printer stopped extruding. If it stopped extruding, because it couldn't exit the nozzle (burnt material, etc), then it would grind at the feeder because the feeder is pushing but there's nowhere for the filament to go.
Can you please elaborate a little more? When you removed the filament from the feeder, what did it look like? Do you have a picture?
Does the filament that's in the bowden tube have teeth marks on it?
If you load fresh filament, does anything extrude?
-
1
How to check about filament feeder if it is working or not?
fbrc8-erin 279
Remove the filament from the printer and look and see if a bite's been taken out of it.
-
Our picks
-
Introducing the UltiMaker Factor 4
ArunC posted a topic in UltiMaker 3D printers,
We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications-
-
- 3 replies
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Picked By
MariMakes, -
-
UltiMaker Cura 5.7 stable released
ArunC posted a topic in UltiMaker Cura,
Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more.
-
-
- 26 replies
Picked By
MariMakes, -
-
.thumb.jpeg.0b7a05eafc09add17b8338efde5852e9.jpeg)
Recommended Posts
Smithy 1,144
It looks like that no filament is extruded, because when printing in the air you would have a lot of loose filament in the printer.
Check if filament feeder is working, maybe grinded filament or clogged nozzle, or ......
Link to post
Share on other sites