Hide Cura printer bed visually

[LeoY 0]

Hi,

 

Is there an option to hide the printerbed temporary in Cura (3.5). The reason is when the bottom-part of the printobject is checked, it is not very well visible due to the printerbed drawn in Cura.

Also when using the custom support-addon, or custom support blocker-addon at the bottom area of the printobject, then the same issue occurs (bad visibility of the printobject).

Leo

[nallath 1,123]

Not at the moment. It's not that hard to make, but it's probably mostly an issue of "Where are we going to put the button that handles this"

[LeoY 0]

/optimistic mode on

The left side where also the button is for the custom support (blocker) would be great :)

Maybe when more people use the mentioned addon's (or different ones), then the neccesity of such feature will be more noticable.
Thanks for your fast reply.

Leo

 

[adamrw240 0]

How has this feature never been added? Why would it default to showing the screws and springs under the bed when it chugs slow enough just loading two stl files?

[nallath 1,123]

Because it's not the bed rendering that is causing the slowdown 😉