Hi gr5,
thank you for your fast reply. I used the same settings as 2 weeks before, when I started to use the new filament... so this can hardly affect the delay.
As well I normally see the cores heating up again (red flashing light)... this doesn´t happen. It stays white while pending at the nozzle switch station...
I seems to me that there is a mem-error or some kind of loop that needs to be broken prior to continuing to print... as well in the beginning there wasn´t hardly any delay. As the printed object got hiher in the z-axis the delay started to get more immanent. Maybe it recalculated the sliced objekt again each time when it hoped to another z-level and then trying to refind its position..
I will try to print another object when I come back from my x-mas trip in a week and then hopefully the error will have "magically" disapeard into some paralell universe ;O).
Have a good christmas-time with family or friends!
Greetings
Daniel
Recommended Posts
gr5 2,224
When a core is not in use it cools that core so it won't leak/drip. So there can be a delay while waiting to heat the new core back up.
There is a feature that preheats the core a certain amount of time before it switches cores. Did you mess with any of the temperatures or any parameters that were in seconds?
Link to post
Share on other sites