Jump to content

Cannot "ack/force" third-party material (Cura 4.0)


jeremie

Recommended Posts

Posted (edited) · Cannot "ack/force" third-party material (Cura 4.0)
  • Cura 4.0.0-BETA / ubuntu18.04.1 LTS / UM3
  • third party filament (Protopasta CFPLA)
  • print over network


Previously, it complained also about the filament not being recognized (no NFC), but I just had to go and confirm on the Printer itself before it allowed printing.

Now, Cura 4 "monitor" tells about it explicitly "Requires configuration changes", which is a very welcomed addition.
So I thought I could tell it to proceed without having to go and click on the printer. However,

  • clicking on the "Override" button of the popup in the MONITOR panel seems to have no effect at all (no change to the interface nor the printer)
  • worse, I cannot find the option anymore on my printer (IIRC with Cura 0.3.5 the printer only displayed a warning and I just had to confirm to start printing)

So

  • What I am doing wrong? How shall I proceed to bypass this (zealous) test, in Cura or on the UM3 ?
  • I really wish there was a "global setting" somewhere to avoid warnings about "unknown" materials completely (if it does not know it should not be that annoying imho). I will post a FR in github for the latter.

Now I am back at finding what I need to tell Cura and my printer so it eventually is willing to print 😕

confirm_no_effect.png

Edited by jeremie
  • Link to post
    Share on other sites

    Posted · Cannot "ack/force" third-party material (Cura 4.0)

    Yes.  Known bug.  This exact issue has been reported to Ultimaker but I'm not sure if it's on their list of things to fix.  Hopefully/probably it is.

     

    @nallath

  • Link to post
    Share on other sites

    Posted (edited) · Cannot "ack/force" third-party material (Cura 4.0)

    Note that though @gr5 is a gr8 moderator here, he has no such power on the github queue. Only you or Cura developers can close your issue on the github issue queue.

    Edited by ahoeben
  • Link to post
    Share on other sites

    Posted · Cannot "ack/force" third-party material (Cura 4.0)
    13 hours ago, ahoeben said:

    Only you or Cura developers can close your issue on the github issue queue.

    1

    OK, I leave it to Ghostkeeper who seems to be involved -- at least it looks like I did not posted a redundant entry on github.

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...