Jump to content

how does it work for you?


Recommended Posts

Posted · how does it work for you?

Ok, so i bought it, installed it, reloaded it, upgaded it and calibrated it. Tested original printhead to see if it was the same as before (I was getting some very nice prints) and so far all back to normal. So now what about the second printhead? now it all gets a bit confusing really, what with ''don't use this version of Cura use that version'' or ''use this slicer, even though the results aren't as good'' or ''what you want to do is write your own G-code and drop it in your firmware'' Now I understand it is ''experimental'' but to me that means calibration, temp, retraction speed, wipe tower etc not here it is you get it to work!

I will say that I have spent the last few days trying different things but so far no results worth mentioning... and I don't want to cloud anyones answer with the different configurations i have already tried (maybe I didn't do it right).

So, what is the simple ''no nonsense way that has had results'' way to get this to print a two colour print?

Is there a non official but it works Ultimaker answer? Daid??

Regards to you all

 

  • Link to post
    Share on other sites

    Posted · how does it work for you?

    There is a mac version ?

     

  • Link to post
    Share on other sites

    Posted · how does it work for you?

    I'll be testing and building a mac version tomorrow. I did a bunch of UI changes which I have to test. (Every single UI change needs to be tested at Mac, because random shit tends to break. Which is why the test versions are usually only for Windows. Sorry)

     

  • Link to post
    Share on other sites

    Posted · how does it work for you?

    Yeah, I'm waiting this version with the new support method... Thanks Daid for your perfect app and job

     

  • Link to post
    Share on other sites

    Posted · how does it work for you?

    And if people haven't noticed. There is a Mac-test-version available now.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...