Bridging and infill.

[TR33C3 0]

Hey everyone! Im fairly new to 3D printing and have been fine tuning some settings. I was going to start messing with the bridging settings in there experimental section of cura and was curious if cura counts going over infill as bridging or if it treats it like any other layer? This way I know if I can get away with less infill by achieving better bridging over the infill. If that's how it's treated. 

[ahoeben 1,992]

Going over infill is not part of bridging.

[TR33C3 0]

Thank you for the knowledge👍.