Jump to content
UltiMaker Community of 3D Printing Experts

Problems with Cura and Windows 10 Pro


Recommended Posts

Posted · Problems with Cura and Windows 10 Pro

Seit ein paar Tagen habe ich ein Upgrade von Windows 7 Pro auf Windows 10 Pro gemacht und seitdem funktioniert Cura nicht mehr.

Versuche mit älteren Cura Versionen und Versuchen in verschiedenen Kompatibilitätäsmodi haben keine Lösung gebracht. Auch Neuinstallation hat nicht geholfen. Folgendes passiert, wenn ich Cura (4.4.1, Deutsch) starten will:


Cura.exe funktioniert nicht mehr

Das Programm wird aufgrund eines Problems nicht richtig ausgeführt.
Das Programm wird geschlossen und Sie werden benachrichtigt, wenn eine Lösung verfügbar ist.


Verwendetes Programm: Cura-4.4.1

Nach der Anzeige "Die Benutzeroberfläche wird geladen...."

Weisser Bildschirm mit Fenster in der Mitte mit o.g. Fehlermeldung.

Kompatibilitätstests mit Win 8 und Win 7 bringen gleiches Ergebniss.

Installiert: Windows 10 Pro.


Ich wäre für Hinweise sehr dankbar. P.S.: Auch die Verlagerung des Pugins "Updatechecker" auf den Desktop hat nichts gebracht (stand in irgendeinem Blog)


Viele Grüße


  • Link to post
    Share on other sites

    Posted · Problems with Cura and Windows 10 Pro

    Problem gelöst. Es lag eindeutig an einem veralteten Grafikkarten Treiber.

    Treiber update gemacht und schon sind alle Probleme beseitigt.

    Ich habe einen Dell Rechner der Serie 7010 mit Grafikkarte auf dem Mainboard.


    Hoffentlich hilft dieser Tip anderen usern bei der Fehlerbehebung.




  • Link to post
    Share on other sites

    • 2 weeks later...
    Posted · Problems with Cura and Windows 10 Pro

    Hallo, ich hätte da auch mal ne Frage. Ich habe ein TREKSTOR Windows Tablet. Das habe ich nach langer Zeit mal wieder geupdatet. 
    Ich bekomme eine Meldung das diese App auf dem Gerät nicht läuft. 

    hat mit so Tablets jemand Erfahrung ?


    wäre nur für Zuhause und evtl. Direkt am Drucker das ich da was habe für kleine Änderungen 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

    • Our picks

      • Here it is. The new UltiMaker S7
        The UltiMaker S7 is built on the success of the UltiMaker S5 and its design decisions were heavily based on feedback from customers.
        So what’s new?
        The obvious change is the S7’s height. It now includes an integrated Air Manager. This filters the exhaust air of every print and also improves build temperature stability. To further enclose the build chamber the S7 only has one magnetically latched door.
        The build stack has also been completely redesigned. A PEI-coated flexible steel build plate makes a big difference to productivity. Not only do you not need tools to pop a printed part off. But we also don’t recommend using or adhesion structures for UltiMaker materials (except PC, because...it’s PC). Along with that, 4 pins and 25 magnets make it easy to replace the flex plate perfectly – even with one hand.
        The re-engineered print head has an inductive sensor which reduces noise when probing the build plate. This effectively makes it much harder to not achieve a perfect first layer, improving overall print success. We also reversed the front fan direction (fewer plastic hairs, less maintenance), made the print core door magnets stronger, and add a sensor that helps avoid flooding.

        The UltiMaker S7 also includes quality of life improvements:
        Reliable bed tilt compensation (no more thumbscrews) 2.4 and 5 GHz Wi-Fi A 1080p camera (mounted higher for a better view) Compatibility with 280+ Marketplace materials Compatibility with S5 project files (no reslicing needed) And a whole lot more  
        Curious to see the S7 in action?
        We’re hosting a free tech demo on February 7.
        It will be live and you can ask any questions to our CTO, Miguel Calvo.
        Register here for the Webinar
          • Like
        • 11 replies
      • UltiMaker Cura 5.3.0-Alpha 🎄 Tree Support Spotlight 🎄
        Are you a fan of tree support, but dislike the removal process and the amount of filament it uses? Then we would like to invite you to try this special release of UltiMaker Cura. Brought to you by our special community contributor @thomasrahm
        We generated a special version of Cura 5.2 called 5.3.0 Alpha + Xmas. The only changes we introduced compared to UltiMaker Cura 5.2.1 are those which are needed for the new supports. So keep in mind, this is not a sneak peek for Cura 5.3 (there are some really cool new features coming up) but a spotlight release highlighting this new version of tree supports.  
          • Like
        • 17 replies
      • New here? Get ahead with a free onboarding course
        Often getting started is the most difficult part of any process. A good start sets you up for success and saves you time and energy that could be spent elsewhere. That is why we have a onboarding course ready for
        Ultimaker S5 Pro Bundle, Ultimaker S5, Ultimaker S3 Ultimaker 2+ Connect.   
        They're ready for you on the Ultimaker Academy platform. All you need to do to gain access is to register your product to gain free access. 
        Ready? Register your product here in just 60 seconds.
          • Like
        • 14 replies
    • Create New...