Jump to content

Bad quality infill and Printing in the air


Recommended Posts

  • 4 weeks later...
Posted · Bad quality infill and Printing in the air

Hello naiaborio!

 

The bad infill and printing in the air may be caused by your print speeds for infill and outer/inner wall. 

 

Try reducing the infill speed to 30-50mm/s and outer/inner wall speeds to 15-30mm/s.

 

When you are describing that the printer starts printing in the air, is it due to a clog or filament in the nozzles way, or does the print slide off the bed? If it is one of those or both, try enabling retraction. then click “retract at layer change”. I will also recommend to enable “Z hop when retracted” and “Z hop only over printed parts”. Try setting z hop height to 0.4mm.

 

If possible, can you let me know your current print speeds, material, layer height, and your printer model?

 

Hope this helps, (sorry about the late response)

 

Good luck!

 

 

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
      • UltiMaker Cura 5.7 stable released
        Cura 5.7 is here and it brings a handy new workflow improvement when using Thingiverse and Cura together, as well as additional capabilities for Method series printers, and a powerful way of sharing print settings using new printer-agnostic project files! Read on to find out about all of these improvements and more. 
         
          • Like
        • 26 replies
    ×
    ×
    • Create New...