Jump to content

PLA end of spool


meskan

Recommended Posts

Posted · PLA end of spool

I'm finishing a spool of PLA and want to know the best way to start a new one?  Do I need to remove the filament before the end passes the feeder and dispose of the 2 feet remaining?

  • Link to post
    Share on other sites

    Posted · PLA end of spool

    Option 1: you remove the 2 feet remaining in the tube, get rid of it and out a new spool.

    Option 2: you cut a few inches out of the remaining filament so you can engage the new spool filement in the extruder. This way you waste less filament but keep in mind that retraction wil not work until only the new filament reach the nozzle.

    Option 3: you  bond the old and new filament together. If you do a search you'll find some tips on how to proceed.

  • Link to post
    Share on other sites

    Posted · PLA end of spool

    I always do remove the old end, yes. And then I use those remains for atomic pulls to clean the nozzle, so they are not wasted. But I use a more gentle atomic pull method than the official, without brutal pulling. See the manual here:

    https://www.uantwerpen.be/nl/personeel/geert-keteleer/manuals/

     

    I have tried welding new and old filaments together. Technically this works, but it is so much hassle that it is not worth the effort for me. Unless you would have a long and complex print that you don't want to restart, or you would waste way too much material. But I don't have these issues: my prints usually take ca. 2...3 hours, and 2...3 meters of filament.

     

    Maybe you could push the new filament behind the old one? But then, first you would have to cut off the deformed end of the old one. And then stay with the printer while pushing on the new filament: this may be a little hard to insert. But during the transition time when there is old and new filament in the tube, retractions won't work.

     

  • Link to post
    Share on other sites

    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now
    • Our picks

      • UltiMaker Cura 5.8 Stable released 🎉
        In the Cura 5.8 stable release, everyone can now tune their Z seams to look better than ever. Method series users get access to new material profiles, and the base Method model now has a printer profile, meaning the whole Method series is now supported in Cura!
        • 5 replies
      • Introducing the UltiMaker Factor 4
        We are happy to announce the next evolution in the UltiMaker 3D printer lineup: the UltiMaker Factor 4 industrial-grade 3D printer, designed to take manufacturing to new levels of efficiency and reliability. Factor 4 is an end-to-end 3D printing solution for light industrial applications
          • Thanks
          • Like
        • 3 replies
    ×
    ×
    • Create New...